[1] Rahman M.M, Hasanuzzaman M, Rahim NA. Effects of various parameters on PV-module power and efficiency. Energ Conver Manage 2015, Vol.103, pp.348–358. URL: http://dx.doi.org/10.1016/j.enconman.2015.06.067

[2] Makrides G, Zinsser B, Phinikarides A, Schubert M, Georghiou G. Temperature and thermal annealing effects on different photovoltaic technologies. Renew Energy 2012, Vol.43, pp 407– 417.URL:doi:10.1016/j.renene.2011.11.046

[3] Daniela D, Gina B, Björn M, Reise Christian R. On the impact of solar spectral irradiance on the yield of different PV technologies. Sol Energy Mater Sol Cells 2015, Vol. 132, pp 431– 442.URL:doi:10.1016/j.solmat.2014.09.034

[4] Dubey R, Chattopadhyay S, Kuthanazhi V, John JJ, Solanki CS, Kottantharayil A, et al. Performance degradation of field-aged crystalline silicon PV modules in different Indian climatic conditions. Presented at the 40th IEEE photovoltaic spec. Conf. Denver, CO (USA); 2014. URL:doi:10.1109/PVSC.2014.6925612

[5] Tamizh Mani Mani, Kuitche Joseph. Research students of ASU-PRL. Failure and degradation modes of PV modules in a hot dry climate: results after 12 to 26 years of field exposure. PV module reliability workshop NREL; 2013. [26 February]. URL:doi:10.1109/PVSC.2014.6925626

[6] Zagorska V, Ziemelis I, Ancevica L, Putans H. Experimental investigation of photovoltaicthermal hybrid solar collector.Agron Res Biosyst Eng Spec 2012;Vol.1,pp.227–234.

[7] Congedo PM, Malvoni M, Mele M, De Giorgi MG. Performance measurements of monocrystalline silicon PV modules in South-eastern Italy. Energ Conver Manage 2013;Vol.68, pp.1–10. URL:doi:10.1016/j.enconman.2012.12.017.

[8] Eduardo C, Bedin J, Krauss R, Nelson Melegari S, Carlos Munhoz J. Performance of monocrystalline and polycrystalline solar panels in a water pumping system in Brazil. Renew Sustain Energy Rev 2015, Vol.51, pp.1610–1616. URL: doi: 10.1016/j.rser.2015.07.082

[9] Midtgard O.M, Sætre TO, Yordanov G, Imenes AG, Nge CL. A qualitative examination of performance and energy yield of photovoltaic modules in southern Norway. Renew Energy 2010, Vol.35, pp.1266–1274. URL:doi:10.1016/j.renene.2009.12.002

[10]Abdelkader M.R, Al-Salaymeh A, Al-Hamamre Z, Sharaf F. A comparative analysis of the performance of monocrystalline and multiycrystalline PV cells in semi-arid climate conditions: the case of Jordan. Jordan J Mech Ind Eng 2010, Vol.4, pp.543–552.

[11]Dolara A, S. Leva, G. Manzolini, Comparison of different physical models for PV power output prediction, Sol. Energy 119 (2015) 83-99. doi:10.1016/j.solener.2015.06.017

[12]Wang M, Peng J, Luo Y, Shen Z, Yang H, Comparison of different simplistic prediction models for forecasting PV power output: Assessment with experimental measurements, Energy 224 (2021) 120162. URL: doi: 10.1016/j.energy.2021.120162.

[13]Муминов Р.А, Турсунов М.Н, Сабиров Х, Абдиев У.Б, Юлдошов Б.А, Абилфайзиев Ш.Н. “Исследование влияния температуры на параметры фототепловых батарей в южных регионах республики”. Альтернативная энергетика и экология №25_27. 40-47 стр. URL: https://doi.org/10.15518/isjaee.2021.09.040-047

[14]Мўминов Р.А, Турсунов М.Н, Сабиров Х, Юлдошов Б.А, Абилфайзиев Ш.Н. Фототепловая батарея с коллектором из сотового поликарбоната” Узбекистан, Ташкент, FAP № 01886 от 24.03.2022.

[15]Абилфайзиев Ш.Н. Фотоэлектрик батареяга бириктирилган иссиқлик коллекторида кечадиган физик жараёнларнинг математик модели. Тенденции развития физики конденсированных сред. III Международной научной конференции, Узбекистан, Фeргана (2023), Cт. 333-337