De Oliveira Quevedo, J. (2017). Analysis and design of an electronic on-load tap changer distribution transformer for automatic voltage regulation. IEEE Transactions on Indus-trial Electronics, 64(1), 883-894. https://doi.org/10.1109/TIE.2016.2592463.

Heydarabadi, F. R. (2014). Diagnosing power transformers faults. Russian Electrical Engineering, 85(12), 785-793. https://doi.org/10.3103/S1068371214120207

IEEE Standards Association (IEEE SA). (2016). IEEE Standard Requirements for Instrument Transformers (IEEE Std C57.13-2016).

Interstate system of standardization. (2014). Standards of quality of electric energy in general purpose power supply systems (GOST 32144-2013). Moscow: Standardinform.

Ismail, A. A. A., Alsuwaidi, H., & Elnady, A. (2021). Automatic Voltage Stabilization Using IGBT Based on Load Tap Changer With Fault Consideration. IEEE Access, 9, 72769-72780. https://doi. org/10.1109/ACCESS.2021.3079507

Kobilov, M. H., & Tuychiev, Z. Z. (2024). Influence of voltage deviation in transmission networks on the operation mode of power transformers. (In Uzbek). Science and Innovative Development, 7(1), 67-74.

Kobilov, M. H., & Tuychiev, Z. Z. (2024a). Analysis of the research results of the experiment conducted on the power transformer of a contactless automatic voltage rectifier. (In Uzbek). Scientifictechnical journal (STJ FerPI), 28(7), 87-94.

Kobilov, M. H., et al. (2023). Investigation of the influence of voltage deviations in power transmission networks on the operation modes of electrical devices. Energy and Energy Saving: Theory and Practice: Proceedings of the VIII International Scientific and Practical Conference (2023, December 6-8, p. 428-1-6). Kemerovo.

Kobilov, M. Kh., & Tuychiyev, Z. Z. (2023). The influence of voltage deviation in electrical networks to the reliability of power transformers with the voltage 6-10/0.4 kV. Actual problems of power supply system: Proceedings of the III International Scientific and Technical Conference (2023, September 7-8, pp. 36-39). Tashkent.

Ma, H., & Gu, S. (2017). On-load automatic voltage regulation system designed via thyristor for distribution transformer. Proceedings of the 20th International Conference on Electrical Machines and Systems – ICEMS (pp. 1-5). Sydney, Australia.

Okilly, A., & Kim, N. (2023). Development of a smart static transfer switch based on a TRIAC semiconductor for AC power switching control. Energies, 16(1), 1-16. Basel. https://doi.org/10.3390/ en16010526

Robert, M., & Bertrand, P. (2010). Transformer Design Principles (2nd ed.). Taylor and Francis Group LLC.

Sarimuthu, Ch. R., Ramachandaramurthy, V. K., Agileswari, K. R., & Mokhlis, H. (2016). A review on voltage control methods using on-load tap changer transformers for networks with renewable energy sources. Renewable and Sustainable Energy Reviews, 62, 1154-1161. https://doi.org/10.1016/j. rser.2016.05.016.J

Song, K., Wang, H., Ma, H., Xu, H., Liu, B., Wu, Sh., Gu, Sh., & Yang, Q. (2019). Research and experimental analysis on automatic voltage regulation of 10 kV distribution transformer[J]. Electric Power Automation Equipment, 39(4). https://doi.org/10.16081/j.issn.1006-6047.2019.04.005.

Wang, J., & Sheng, W. (2014). Design of a Self-adaptive Distribution Transformer, Automation of Electric Power Systems, 38(18), 86-92. https://doi.org/10.7500/AEPS20140208002

Yulin, Z., & Shoutian, D. (2009). Design of non-contact on-load automatic regulate voltage transformer. Proceedings of the Asia-Pacific Power and Energy Engineering Conference – APPEEC-2009 (pp. 1-4). Wuhan, China.

Zad, B. (2013). Improvement of on-load tap changer performance in voltage regulation of MV distribution systems with DG units using D-STATCOM. Electricity Distribution (CIRED 2013): Proceedings of the 22nd International Conference and Exhibition (pp. 1-5). Stockholm, Sweden.