Van der Poel C. A general system describing the visco-elastic properties of bitumen and its relation to routine test data. Journal of Applied Chemistry. 1954;4:221-236

Faheem A, Bahia H. Using gyratory compactor to measure mechanical stability of asphalt mixtures. Wisconsin Highway Research Program; 2004

Centeno M, Sandoval I, Cremades I, Alarcon J. Assessing rutting susceptibility of five different modified asphalts in bituminous mixtures using rheology and wheel tracking test (No. 08-0705); 2008

Hofstra A, Klomp AJG. Permanent deformation of flexible pavements under simulated road traffic conditions. In: Third International Conference on the Structural Design of Asphalt Pavements. Vol. 1. 1972. pp. 613-621

McGennis RB. Background of SUPERPAVE asphalt mixture design and analysis. Federal Highway Administration; Available through the National Technical Information Service; 1994

Anderson DA, Peterson JC, Christensen DW. Variations in asphalt cements and their effects on performance of asphalt concrete mixtures. In: Presented to the Association of Asphalt Paving Technologies; 1986

Kim YR. Modeling of Asphalt Concrete (the American Society of Civil Engineers). McGraw-Hill Professional; 2009

Bahia HU, Hanson DI, Zeng M, Zhai H, Khatri MA and Anderson MR. NCHRP Report 459, Characterization of Modified Asphalt Binders in Superpave Mix Design. Prepared for the National Cooperative Highway Research Program. Washington, D.C.: Transportation Research Board, National Research Council; 2001

D’Angelo JA, Dongre R, Reinke G. Creep and recovery. Public Roads. 2007; 70(5):24-30

Delgadillo R, Nam K, Bahia HU. Why do we need to change G*/sin δ and how? Road Materials and Pavement Design. 2006;7(1):7-27

Delgadillo R, Cho DW, Bahia HU. Nonlinearity of repeated creep and recovery binder test and relationship with mixture permanent deformation. Transportation Research Record. 2006b; 1962(1):2-11

D’Angelo J, Kluttz R, Dongre R, Stephens K, Zanzotto L. Revision of the superpave high temperature binder specification: The multiple stress creep recovery test. Asphalt Paving Technology. 2007b;76(123)

D’Angelo R, Dongre R, Reinke G. Evaluation of repeated creep and recovery test method as an alternative to SHRP+ requirements for polymer modified asphalt binders. In: Proceedings, Canadian Technical Asphalt Association, November; 2006

Shenoy A. Refinement of the superpave specification parameter for performance grading of asphalt. Journal of Transportation Engineering. 2001;127 (5):357- 362

Shenoy A. Nonrecovered compliance from dynamic oscillatory test Vis-a-Vis nonrecovered compliance from multiple stress creep recovery test in the dynamic shear rheometer. International Journal of Pavement Engineering. 2008;9:329-341

Bouldin MG, Dongré R, D’Angelo J. Proposed refinement of superpave high temperature specification parameter for performance-graded binders. Transportation Research Record: Journal of the Transportation Research Board. 2001;1766(1):40-47.