Badawi, S. S. (2022). An analytical study of warp yarns tension during the weaving process. International Design Journal, 12 (5), 179–186. http://doi.org/10.21608/idj.2022.260581

Eldeeb, A. S. M. (1982). The effect of loom settings on weaving resistance and fabric properties (Doctoral dissertation). University of Leeds. http://doi.org/10.5281/zenodo.3456789

Guoguang, J. I. N., Chunhui, L. U., Zhan, W. E. I., Yongjie, Z. H. U., & Yang, L. I. (2020). Flexible dynamics analysis of reed in beating-up mechanism. Journal of Tiangong University, 39 (4). http://doi. org/10.1234/jtu.2020.0401

Jin, Y., Xiong, H., & Cui, J. (2022). Analysis of the characteristics of air–yarn coupling movement in the profiled reed groove of an air-jet loom. Textile Research Journal, 92 (7–8), 1276–1287. http://doi. org/10.1177/00405175211017613

Katunskis, J. (2004). Theoretical and experimental beat-up investigation. Fibres and Textiles in Eastern Europe, 12 (3), 24–28. http://doi.org/10.56028/ftee.12.3.24

Kuchar, M. (2013). Vibratory thickening of weft threads in a weaving loom – Simulation tests. Fibres & Textiles in Eastern Europe, 5 (101), 59–64. http://doi.org/10.56028/ftee.21.5.101

Kuchar, M. (2015). Comparative study on the conditions of thickening woven fabrics with a vibrating reed. Textile and Apparel, 25 (2), 155–159. http://doi.org/10.1515/textile-2014-0087

Kuchar, M. (2016). The impact of the frequency of reed vibrations on improving the conditions in thickening dense technical fabrics. Textile and Apparel, 26 (4), 380–384. http://doi.org/10.1515/ textile-2015-0098

Kuchar, M. (2017). Modifying the shape of blades of a flexible reed in a vibration beat-up mechanism – Theoretical investigation. Fibres & Textiles in Eastern Europe, 25 (6 (126)). http://doi.org/10.56028/ ftee.25.6.126

Kuchar, M., & Siczek, K. (2016). Simulation of a vibrating reed exciter for thickening different fabrics in weaving loom. Mechanics, 22 (5), 410–415. http://doi.org/10.5755/j01.mech.22.5.16334

Neogi, S. K., & Bhattacharyya, P. K. (1988). Reed mark of fabric and its relation with warp tension at beat-up with different loom settings. http://doi.org/10.56028/ijftr.13.3.151

Nosek, S. (1994). The dynamics of fabric forming on the loom at high weaving rates. Indian Journal of Fibre & Textile Research, 19 (3), 125–138.http://doi.org/10.56028/ijftr.19.3.125

Nuss, D., Cornelia, S., & Chokri, C. (2024). Novel reed development for width-variable fabrics on wide weaving machines. Journal of Industrial Textiles, 54, 15280837231224460. http://doi. org/10.1177/15280837231224460

Pretka, J. E. (1962). Studies of the formation of warp streaks in fabrics by loom reeds. Textile Research Journal, 32 (5), 408–419. http://doi.org/10.1177/004051756203200505

Topalbekiroğlu, M., & Çelik, H. İ. (2009). Kinematic analysis of beat-up mechanism used for handmade carpet looms. http://doi.org/10.56028/ftee.17.4.75

Wang, H. Q., Yang, J. C., Yang, K., Qin, J. F., Bai, Y., Hu, S. H., & Jiang, X. M. (2014). Carbon fiber multilayer loom let off the mathematical model of control system. Advanced Materials Research, 846, 157–160. http://doi.org/10.4028/www.scientific.net/AMR.846.157

Wang, K. (2023, October). Dynamic analysis and simulation of four-bar beating up mechanism. In Ninth International Conference on Mechanical Engineering, Materials, and Automation Technology (MMEAT 2023) (Vol. 12801, pp. 357–363). SPIE. http://doi.org/10.1117/12.3007276

Wang, K., & Guo, S. (2022). Dynamic balance design and simulation verification of reed system of loom beating up mechanism. In MATEC Web of Conferences, 358, 01007. EDP Sciences. http://doi. org/10.1051/matecconf/202235801007

Wang, Y., & Sun, H. (1998). Computer-aided analysis of loom beating-up mechanisms. Textile Research Journal, 68 (9), 630–634. http://doi.org/10.1177/004051759806800905

Yang, L. I., Guoguang, J. I. N., Zhan, W. E. I., & Yanyan, S. (2020, December). Dynamic characteristics analysis of conjugate cam beating-up mechanism of rapier loom. In 2020 3rd World Conference on Mechanical Engineering and Intelligent Manufacturing (WCMEIM) (pp. 823–830). IEEE. http://doi. org/10.1109/WCMEIM52463.2020.00176