Kornev, A. E., Bukanov, A., & Sheverdyaev, O. N. (2019). Tekhnologiya elastomernykh materialov [Technology of elastomer materials]. NPPA “Istek”

Lazim, N. H., Shamsudin, S. A., Hidzir, N. M., Keong, C. C., & Ichinose, I. (2023). Optimizing natural rubber blends for examination gloves: Vacuum radiation for mechanical strength and solvent barrier. Journal of Applied Polymer Science, 141, 54741

Li, B., Deng, B., & Shou, W. (2024). Computational discovery of microstructured composites with optimal stiffness–toughness trade-offs. Science Advances, 10(5), 548–552. https://doi. org/10.1126/sciadv.adk4284

Nozu, S., Tsuji, H., & Onishi, K. (2021). A prediction model for rubber curing process. In V. Vikhrenko (Ed.), Heat transfer – Engineering applications, 151–170. InTech

Rafei, M., Ghoreishy, M. H. R., & Naderi, G. (2019). Development of an advanced computer simulation technique for the modeling of rubber curing process. Computational Materials Science, 47, 539–547

Song, W. X., Wang, Z. X., Wang, M., Zhang, G. G., Li, F. Z., Zhang, X., Lu, Y. L., & Zhang, L. Q. (2023). Comparative study of vulcanization system on strain-induced crystallization of epoxidized natural rubber. Polymer, 274, 125911

Tikhomirov, S. G., Pyatakov, Y. V., Karmanova, O. V., Maslov, A. A., Khaustov, I. A., & Podval’nyi, S. L. (2018). A technique of calculating the kinetics of the process of nonisothermal vulcanization of large articles. Chemical and Petroleum Engineering, 53(9–10), 647–652

Vedat, C., & Fatih, M. (2024). Effect of the filler content on some physical and mechanical properties of virgin- and recycled thermoplastic polyurethane composites. BioResources, 19(4), 9358– 9374

Wang, D. H., Dong, Q., & Jia, Y. X. (2015). Mathematical modeling and numerical simulation of the non-isothermal in-mold vulcanization of natural rubber. Chinese Journal of Polymer Science, 33, 395–403

Wu, J., Su, B., Liu, Q., & Wang, Y. (2017). Research on vulcanization process simulation of butyl rubber based on a new characterization model of curing degree. Progress in Rubber, Plastics and Recycling Technology, 30(4)

Yan, X. (2007). A numerical modeling of dynamic curing process of tire by finite element. Polymer Journal, 39, 1001–1010

Yau, Y. H., Wong, H. F., & Ahmad, N. (2012). Numerical heat transfer study for a large rubber product. International Journal of Heat and Mass Transfer, 55, 2879–2888

Yusupbekov, N. R., & Muxitdinov, D. P. (2015). Texnologik jarayonlarni modellashtirish va optimallashtirish asoslari [Fundamentals of modeling and optimization of technological processes]. Fan va texnologiya

Dontsov, A. A. (2018). Protsessy strukturirovaniya elastomerov [Processes of elastomer structuring]. Khimiya

Emel’yanov, V. V., Kureychik, V. V., & Kureychik, V. M. (2003). Teoriya i praktika evolyutsionnogo modelirovaniya [Theory and practice of evolutionary modeling]. Fizmatlit

Han, Y., Zheng, H., Liu, Y., Wang, M., Wang, J., Xie, Q., Jing, S., Qin, X., & Zhang, L. (2024). Synergistic development of natural rubber/butyl rubber composites for improved interfacial bonding and enhanced shock-absorbing capabilities. ACS Omega, 9, 13897–13905

Ismailov, M. A., & Avezov, T. A. (2023). Elastomer kompozitlar ishlab chiqarishda aralashtirish jarayonini modellashtirish [Modeling of the mixing process in elastomer composite production]. Muhammad Al-Xorazmiy Avlodlari Ilmiy-Amaliy Jurnali, 3(5), 140

Khakimzyanov, G. S. (2014). Matematicheskoe modelirovanie [Mathematical modeling]. Novosibirsk

Yusupbekov, N. R., Muxitdinov, D. P., Bazarov, M. B., & Xalilov, A. J. (2020). Boshqarish sistemalarini kompyuterli modellashtirish asoslari [Fundamentals of computer modeling of control systems]