ANALYSIS AND SELECTION OF METHODS AND SENSORS FOR CONTROLLING THE WIDTH OF THE WORKING SLOT OF THE HARVESTING DEVIC CP

Admin bo'lib kirish (www.admin.slib.uz)

Tizim sinov (TEST) rejimida ishlamoqda! Murojat uchun @slib_support

Eski talqinga o'tish link

9 март 2023

Asosiy til:Ingliz

ANALYSIS AND SELECTION OF METHODS AND SENSORS FOR CONTROLLING THE WIDTH OF THE WORKING SLOT OF THE HARVESTING DEVIC CP

Fan yo'nalishi:

6409cd91d3938.pdf

PDF

Technical science and innovation

Maqola chop etish see more

MAQOLA ANNOTATSIYASI

A review and analysis of known works on the automation of control and regulation-monitoring of the width of the working slots of the harvesting apparatus (НA) of the cotton harvester, in particular, the automation of control and regulation of working units, which determines the indicators of the quality of the harvest and the productivity of the cotton harvester, is carried out. It has been substantiated that in order to increase the efficiency of the functioning of the cotton picker, automatic control and management systems are needed that perform the functions of information-measuring and control systems that perform horizontal and vertical adjustment of the position of the harvesting device and adjust the working gap according to the agricultural background, inform the driver about other important parameters of the cotton picker and cotton-growing machine-tractor units (CGMTU). It has been established that one of the most important parameters to be monitored and regulated by the cotton harvester is the width of its working slot (WWS), which determines the productivity and quality of the cotton harvester collection. It was revealed that despite some progress in this direction, there is still a lot of research work to be done on the development of intelligent converters, sensors, instrumentation and control devices. At the same time, one of the main element and node that determines the accuracy of control and regulation of the width of the working slot is sensors that control and convert the width of the working slot into a different type of signal proportional to them, convenient for further use, which is an urgent issue. In this regard, the work considered and carried out a critical analysis of the principles of construction and operation, methods and sensors for controlling the width of the working slots (WWS), for example: contact with mechanical switches, inductive and potentiometric sensors with outputs of the controlled parameters to various display elements: numbered color lamps, displays, etc. The main characteristics, advantages and disadvantages of the considered sensors are given, as a result of which it is concluded that it is necessary to continue research and development in this direction.

MUALIFLAR

Teglar

# sensor# error# capacity# width# inductance# parameters# cotton picker# harvesting machine# working slot# potentiometer

Maqolani baholang

0

0 ta

Maqola idintifikatorlari

ROI:

https://eroi.uz/11.0008/A0323-0005

DOI:

Mavjud emas

Foydalanilgan adabiyotlar

Analysis of the data of Table 3 shows that the main rock-forming minerals of the weeds are quartz, feldspar, fragmentary rocks, the percentage of carbonate was – 13.0. The analysis found that the content in the seeding of crushing porphyries, sulfuric and sulfuric acid compounds, organic components meet all the requirements

V.Y. Shishmarev. Typical elements of automatic control systems: Textbook for seed. prof. education. “Publisher Center Academy”. 2004. 304.

M.A. Babikov, A.V. Kosinsky. Elements and devices of automation. “Higher School of Economics”. 1975.

E. Ulzhaev, U.M. Ubaydullaev, G.T. Tajitdinov, S. Narzullaev. “Development of criteria for the synthesis of the optimal structure of monitoring and control systems”.2020

R.A. Aliev, N.R. Yusupbekov, J. Kachpshik, V. Pedrych, F.M. Sadikoglu. 11th World Conference. "Intelligent Industrial Automation Systems". WCIS. 2020

E. Ulzhaev, U.M. Ubaidullaev, Z.E. Ulzhaev. Electronic on-board control system for operational and technological parameters of cotton-growing plants. Monthly scientific and practical journal. "Tractors and agricultural machines". 2014. 11

E. Ulzhaev, A.D. Abdazimov, U.M. Ubaidullaev. Methodology for diagnosing the probability of trouble-free operation of a cotton harvester. “Proceedings of the St. Petersburg State Agrarian University”. 2018. 270

E.U. Ulzhaev, A.D. Abdazimov, U.M. Ubaydullaev. Intelligent onboard MPC for monitoring and controlling technological parameters of MTA with tractor TTF. International scientific and practical Conference. “Technology of the future, prospects for the development of agricultural machinery". 2013. 189

A.S. Sadriddinov, A.D. Abdazimov, E. Ulzhaev. Improving the working bodies and controllability of a cotton harvester with the location of harvesting machines behind the tractor drive bridge. Materials of the International Journal. NTC "Modern problems of mechanics". “Tashkent: research Institute of mechanics and SS of the academy of sciences of the Republic of Uzbekistan”. 2009. 273

E. Ulzhaev, A.D. Abdazimov, Sh.T. Ravutov, F.A. Tulbaev. Hardware supports the system of automatic control and regulation of parameters of mobile objects. “Chemical technology, control and management”. 2012. 29.

A.D. Abdazimov. “Tracking system for controlling the width of the working slot of the harvesting machine of the cotton harvesting machine”. 2003. 103

E. Ulzhaev, A.D. Abdazimov, U.M. Ubaydullaev, S.M. Sherkobilov, Z.G. Shodiev, A.M. Nosirov. Mechanism of adjustment of working slots of vertical-spindle cotton harvesting apparatus. “Agencies for intellectual property under the Ministry of justice of the Republic of Uzbekistan”. 2020

A.D. Abdazimov, E. Ulzhaev, U.M. Ubaydullaev, N.N. Omonov. “Fundamentals of automation of control and control of technological parameters of cotton harvesters”. 2014. 164

E. Ulyaev, U.M. Ubaydullaev. Diagnostic devise for changing the airflow velocity in the pneumatic chamber of cotton harvesters. “Ninth world conference "Intelligent industrial automation systems". 2016.

N. G. Farzane. Technological measurements and devices. "Higher School". 1989. 456

V. V. Cherenkov. Industrial devices and automation tools. "Mechanical engineering", 1987. 847