In this article, steel production enterprises, as a rule, do not have special
equipment for steel processing. Under such conditions, practice shows that the only and very
effective way to improve the quality of steel is the treatment of liquid metal with special complex
modifier alloys in a steel-pouring furnace. Modification of metals and alloys (its diversity) is a
deep process that actively affects the state of metal solutions during the crystallization period of
their presence by introducing small additives of substances (modifiers) that lead to a change in
the morphology of non-metallic inclusions. A change in the energy state and a decrease in the
contamination of the boundaries of the grains of the metal matrix lead to an improvement in the
mechanical and technological properties of the steel casting.
In this article, steel production enterprises, as a rule, do not have special
equipment for steel processing. Under such conditions, practice shows that the only and very
effective way to improve the quality of steel is the treatment of liquid metal with special complex
modifier alloys in a steel-pouring furnace. Modification of metals and alloys (its diversity) is a
deep process that actively affects the state of metal solutions during the crystallization period of
their presence by introducing small additives of substances (modifiers) that lead to a change in
the morphology of non-metallic inclusions. A change in the energy state and a decrease in the
contamination of the boundaries of the grains of the metal matrix lead to an improvement in the
mechanical and technological properties of the steel casting.
| № | Author name | position | Name of organisation |
|---|---|---|---|
| 1 | Turakhodjayev N.D. | teacher | TSTU |
| 2 | Chorshanbiyev S.M. | researcher | TSTU |
| 3 | Eshankulov U.D. | teacher | TSTU |
| 4 | Abdullayev F.K. | teacher | TSTU |
| № | Name of reference |
|---|---|
| 1 | I.Nasir. “Materials science”, 2002. 173. |
| 2 | V.A.Mirbabaev. “Technology of structural materials”, 2004. 148. |
| 3 | S.F. Gnusov., V.P. Rothstein., S.D. Pelevin., S.A. Kirsanov. Deform behavior and break-off destruction of the old Gadfield under shock-wave loading. “News of higher educational institutions”, 2010. 56. |
| 4 | N.D. Turakhodzhaev., L.E. Yakubov., T.H. Tursunov. Mathematical model of heat treatment to improve mechanical properties. “Composite material”, 2018. 56. |
| 5 | D.A. Inexile., A.N. Leontiev., A.V. Ishkov. Improving the durability and excursion hopes of caterpillar engine parts of agricultural machinery and special machines. “Bulletin of the Altai State University”, 2012. 5. |
| 6 | D.A. Tsurkan. “Increasing the structural strength of 110G13L steel and cast parts used in special machines by alloying Mo, Ni and modifying IT”, 2012. 19. |
| 7 | I.K.Pokhodnya., V.Z. Turkevich. Physical and technical problems of modern materials science. “Kiev-Academic Period”, 2013. 39. |
| 8 | N. Salakhiddin., A. Rasulov., N. Turakhadjaev., K. Bakhadirov., L. Yakubov., Kh. Abdurakhmanov., T. Tursunov. Development of new structural materials with improved mechanical properties and high quality of structures through new methods. Journal of materials science research, Canada. “Canadian Center of Science and Education”, 2016. 52 |
| 9 | I.K. Pokhodnya., V.Z. Turkevich. Physical and technical problems of modern materials science. “Kiev-Academic Periodics”, 2013. 39. |
| 10 | S.A. Rasulov., V.A. Grachev. “Foundry metallurgy”, 2004. 87. |
| 11 | L.Y. Kozlov., V.M. Kolokolchev., K.N. Vdovik., E.B. Ten., L.B.Dolgopolova., A.A.Filippenkov. “Production of steel castings”, 2003, 357 p. |
| 12 | I.I. Novikov. “Theory of heat treatment of metals”, 1996. 123 |
| 13 | Sh.K. Mukushev., D.A. Tsurkan., A.N. Samsonov., Y.P. Makushev., V.A. Kanya. Increasing the wear resistance of the undercarriage parts of bulldozers. “Bulletin of the Siberian Branch of the Academy of Military Sciences”, 2010. |
| 14 | N. Turakhodjaev., Sh. Chorshanbiev., N. Sadikova., K. Chorshanbiev. Ways to increase the strength of shaft gear teeth working in a highly abrasive grinding environment. “Journal of Critical Review”, 2020. |
| 15 | N. Turakhodjaev., Sh. Chorshanbiev., J. Kamalov., B. Yuldashev., J. Egamshukurov., K. Chorshanbiev. Ways to increase the strength of the surface of the parts. “Journal of Critical Review”, 2020. |
| 16 | Sh. Chorshanbiev. Development of technology for increasing the elfish ability of teeth. Collection of scientific works" talented youth of New Uzbekistan the first book. «Educational publishing house”, 2020. 212. |
| 17 | P.F. Parasyuk. The influence of the chemical composition of 110G13L steel and the heat treatment regime on the durability of cast products. “Technology, organization and mechanization of foundry production, journal of TSNIITEITYAZHMASH”, 2002. 79. |
| 18 | D.A. Tsurkan. “Increasing the structural strength of 110G1ZL steel and cast parts used in special machines by alloying Mo, Ni and modifying IT”, 2012. 39. |
| 19 | D.A. Tsurkan., A.N. Leontiev., A.V. Ishkov. Improving the durability and operational reliability of the caterpillar engine parts of agricultural machinery and special machines. “Bulletin of the Altai State University”, 2012. 37 |