The quality fiber left on the saw teeth mixes with the raw material again and
gradually leads to the increase of neps in the fiber content and the deterioration of the quality of the
seed, as well as the increase of electricity consumption due to the increase of friction, and the decrease
of work productivity. Also, the safety of the operators working on the machines is not sufficiently
ensured. Special attention is paid to the study of scientific, practical and comparative analysis of the
origin of these short comings. Uneven rotation of the saw cylinder can lead to deterioration of the
ginning process and fiber damage. Using Lagrange's second equation, we formulate the motion
equations of the machine block of the saw cylinder to determine the non-uniformity of rotation of the
saw cylinder and reduce power consumption. A general drawing scheme of the new construction
ginning machine was created. The kinematic scheme of the rollers and pile drum, which provide the
gin machine of the new construction, was prepared. A dynamic motion model scheme was created for
the rollers and pile drum that supply the feeder module of the gin machine. Formulated the motion
equations using Lagrange's second equation depending on the supplier and the dynamic motion model
of the supply module.
The quality fiber left on the saw teeth mixes with the raw material again and
gradually leads to the increase of neps in the fiber content and the deterioration of the quality of the
seed, as well as the increase of electricity consumption due to the increase of friction, and the decrease
of work productivity. Also, the safety of the operators working on the machines is not sufficiently
ensured. Special attention is paid to the study of scientific, practical and comparative analysis of the
origin of these short comings. Uneven rotation of the saw cylinder can lead to deterioration of the
ginning process and fiber damage. Using Lagrange's second equation, we formulate the motion
equations of the machine block of the saw cylinder to determine the non-uniformity of rotation of the
saw cylinder and reduce power consumption. A general drawing scheme of the new construction
ginning machine was created. The kinematic scheme of the rollers and pile drum, which provide the
gin machine of the new construction, was prepared. A dynamic motion model scheme was created for
the rollers and pile drum that supply the feeder module of the gin machine. Formulated the motion
equations using Lagrange's second equation depending on the supplier and the dynamic motion model
of the supply module.
| № | Author name | position | Name of organisation |
|---|---|---|---|
| 1 | Azizov S.A. | teacher | , Namangan Engineering and Technology Institute |
| 2 | MIRZAKARIMOV M.M. | teacher | , Namangan Engineering and Technology Institute |
| № | Name of reference |
|---|---|
| 1 | 1. Amare Abuhay , Wassie Mengie , Tamrat Tesfaye , Gemeda Gebino , Million Ayele , Adane Haile, Derseh Yillie , Opportunities for New Biorefinery Products from Ethiopian Ginning Industry By-products: Current Status and Prospects, Journal of Bioresources and Bioproducts , Volume 6, Issue 3, 2021, Pages 195-214, https://doi.org/10.1016/j .job.2021.04.001 . |
| 2 | ://doi.org/10.1016/j .job.2021.04.001 . 2. Azizov Shuhrat Mamatovich, Simulation of the strength of a frame of a new Design acm gin machine under the influence of external forces. SCIENCE AND INNOVATION INTERNATIONAL SCIENTIFIC JOURNAL VOLUME 2 ISSUE 7 JULY 2023 UIF-2022: 8.2 | ISSN: 2181-3337 http://scientists.uz/view.php?id=5021 |
| 3 | 3. Akhmedkhodjaev Hamid Tursunovich , Azizov Fame Mamatovich , " Statichesky analysis napryajennogo cost single-cylinder and double-cylinder full djina " Scientific-technical journal ( FarPI ITJ, NTJ FerPI , 2017, T.1, #1) pp. 50-55 . |
| 4 | 4. Matthew SV Pauley, Jean Hodel, Chapter 4 - Gin, Academic Press, 2023, Pages 75-102 , https://doi.org/10.1016/B978-0-12-822443-4.00010-4 . 5. Azizov Shuhrat Mamatovich The stress simulation for finding priority to the forces and loads for rib for preparation new design ginning machine, SCIENCE AND INNOVATION INTERNATIONAL SCIENTIFIC JOURNAL VOLUME 2 ISSUE 7 JULY 2023 UIF-2022: 8.2 | ISSN: 2181-3337 https://zenodo.org/record/8193248 6. Zengxiao Cai , Abu Nasser Md Ahsanul Haque , Renuka Dhandapani , Maryam Naebe , Impact of variability of cotton gin trash on the properties of powders prepared from distinct mechanical approaches, Powder Technology, Volume 413, 2023, https://doi.org/10.1016/j.powtec.2022.118045 7. Azizov Shuhrat Mamatovich "Calculation Energy of Efficiency New Ginning Machine" Engineering Vol.14 No.4 ， April 29, 2022 https://doi:/10.4236/eng.2022.144016 8. William H. Phillips, Profitability and factorybased cotton gin production in the antebellum south, Explorations in Economic History, Volume 44, Issue 2, 2007, Pages 242-254, ISSN 0014-4983, https://doi.org/10.1016 /j.eeh.2006.01.001 9. Azizov Shuhrat Mamatovich in a new construction demon machine worker of the camera size and saw cylinders in the camera location to change looking cotton fiber and seed hurtful forces analysis , BULLETIN OF KHORAZM MAMUN ACADEMY ISSN 2091-573X VOLUME–8-1/2023, https://www.mamun.uz/bulletin 10. John A. Foulk, Roy B. Dodd, David McAlister, David Chun, Danny E. Akin, Herb Morrison, Flax-cotton fiber blends: Miniature spinning, gin processing, and dust potential, Industrial Crops and Products, Volume 25, Issue 1, 2007, Pages 8-16, ISSN 0926-6690, https://doi.org/10.1016/j.indcrop.2006.05.001 . 11. Azizov Shuhrat Mamatovich, Sardorbek Israilov , Jamoliddin Abdurakhimov , Shakir Turgunov "The Definition Technological Parameters of One Chamber Two Saw Cylinders Gin" Latest Trends in Textile and Fashion Designing vo1, issue 1, 17 pages ISSN: 2637- 4595. http://dx.doi.org/10.32474/LTTFD.2018.01.000105 12. Azizov Shuhrat Mamatovich, Farhod Uzokov, Alijanov Shermuhammad, Ahmadjan Hasanov and Mirsharofiddin Mirzakarimov (2022) "Calculation of Cost-Effectiveness of Molds Made of Aluminum, MDF and Steel" / Engineering, 14, 320-328. https://doi:/10.4236/eng.2022.148025 13. Azizov Shuhrat Mamatovich, Farhod Uzokov |
| 5 | 5. Azizov Shuhrat Mamatovich The stress simulation for finding priority to the forces and loads for rib for preparation new design ginning machine, SCIENCE AND INNOVATION INTERNATIONAL SCIENTIFIC JOURNAL VOLUME 2 ISSUE 7 JULY 2023 UIF-2022: 8.2 | ISSN: 2181-3337 https://zenodo.org/record/8193248 |
| 6 | 6. Zengxiao Cai , Abu Nasser Md Ahsanul Haque , Renuka Dhandapani , Maryam Naebe , Impact of variability of cotton gin trash on the properties of powdersprepared from distinct mechanical approaches, Powder Technology, Volume 413, 2023, https://doi.org/10.1016/j.powtec.2022.118045 |
| 7 | 7. Azizov Shuhrat Mamatovich "Calculation Energy of Efficiency New Ginning Machine" Engineering Vol.14 No.4 ， April 29, 2022 https://doi:/10.4236/eng.2022.144016 |
| 8 | 8. William H. Phillips, Profitability and factorybased cotton gin production in the antebellum south, Explorations in Economic History, Volume 44, Issue 2, 2007, Pages 242-254, ISSN 0014-4983, https://doi.org/10.1016 /j.eeh.2006.01.001 |
| 9 | 9. Azizov Shuhrat Mamatovich in a new construction demon machine worker of the camera size and saw cylinders in the camera location to change looking cotton fiber and seed hurtful forces analysis , BULLETIN OF KHORAZM MAMUN ACADEMY ISSN 2091-573X VOLUME–8-1/2023, https://www.mamun.uz/bulletin |
| 10 | 10. John A. Foulk, Roy B. Dodd, David McAlister, David Chun, Danny E. Akin, Herb Morrison, Flax-cotton fiber blends: Miniature spinning, gin processing, and dust potential, Industrial Crops and Products, Volume 25, Issue 1, 2007, Pages 8-16, ISSN 0926-6690, https://doi.org/10.1016/j.indcrop.2006.05.001 |
| 11 | 11. Azizov Shuhrat Mamatovich, Sardorbek Israilov , Jamoliddin Abdurakhimov , Shakir Turgunov "The Definition Technological Parameters of One Chamber Two Saw Cylinders Gin" Latest Trends in Textile and Fashion Designing vo1, issue 1, 17 pages ISSN: 2637- 4595. http://dx.doi.org/10.32474/LTTFD.2018.01.000105 |
| 12 | 12. Azizov Shuhrat Mamatovich, Farhod Uzokov, Alijanov Shermuhammad, Ahmadjan Hasanov and Mirsharofiddin Mirzakarimov (2022) "Calculation of Cost-Effectiveness of Molds Made of Aluminum, MDF and Steel" / Engineering, 14, 320-328. https://doi:/10.4236/eng.2022.148025 |
| 13 | 13. Azizov Shuhrat Mamatovich, Farhod Uzokov, Alijanov Shermuhammad, Ahmadjan Hasanov and Mirsharofiddin Mirzakarimov (2022) "Statically Analysis of the Stress State of Saw Gins Consisting of 90,100,110,120, 130 Saws". Engineering, 14, 329-338. https://doi:/10.4236/eng.2022.148026 |
| 14 | 14. Azizov Shuhrat Mamatovich "The Energy Effective Method of Modeling and Manufacturing of New Profile Teeth of Saw". Journal of Textile Science & Engineering ISSN: 2165-8064. 2017 vol.7 issue1 10 pages |