The article presents the results of solving the problem of attenuation of an optical signal in
fiber-optic communication lines. Widely used modern technical solutions of intermediate
amplification-regenerative nodes of fiber-optic communication lines are described. The
advantages and disadvantages of existing intermediate fiber optic amplifiers are presented. The
Техника фанлари ва инновация №2/2019 й. Technical science and innovation
162
benefits of optoelectronic signal regenerators include a full restoration of the original properties
of the optical signal. The optoelectronic regenerator allows to limiting the amount of internal
and external optical noise by acceptable values, but increases and increases the cost of building
optical fiber connections.Optical signal amplifiers are also used to increase the range of fiberoptic communication lines. The main advantage of intermediate fiber optic amplifiers is their
relatively simple design and, consequently, low cost, as well as high cost of losses and power
output.The technical function of the developed fiber optic amplifier is to create a signal and
power amplifier that is evenly distributed inside the fiber located in the region of the fiber
containing the fluorescent additive.The characteristics, functional and structural diagrams of an
optical repeater with erbium amplifiersare shown in detail. The design features of the
construction and the principle of operation of the erbium amplifier are described.
Maqolada optik tolali aloqa liniyalarida optik signal susayishining muammosini hal qilish
natijalari keltirilgan. Keng tarqalgan zamonaviy texnik yechimlar-optik tolali aloqa
liniyalarining oraliq kuchaytirish-tiklash tugunlari aks ettirilgan.Mavjud bo'lgan oraliq optik
tolali kuchaytirgichlarning afzalliklari va kamchiliklari keltirib o’tilgan. Optoelektron signal
regeneratorlarining afzalliklari optik signalning dastlabki xususiyatlarini to'liq tiklashni o'z
ichiga oladi. Optoelektronik regenerator ichki va tashqi optik shovqin miqdorini qabul
qilinadigan qiymatlar bilan cheklashga imkon beradi, ammo optik tolali ulanishlarni qurish
narxini oshiradi va qiyinlashtiradi.Optik tolali aloqa liniyalari diapazonini oshirish uchun optik
signal kuchaytirgichlari ham qo'llaniladi.Oraliq optik tolali kuchaytirgichlarning asosiy afzalligi
ularning nisbatan sodda dizayni va shuning uchun arzon narxlardagi, shuningdek yo'qotish
koeffitsienti va chiqish quvvatining katta qiymati hisoblanadi.Ishlab chiqilgan optik-tolali
kuchaytirgichning texnik vazifasi signal va energiya uzatiladigan kuchaytirgichni yaratishdan
iborat bo'lib, u asosan tolalar ichida bir xil taqsimlanadi, bu flyuorestsent qo'shimchasi mavjud
bo'lgan tolaning maydonida joylashgan. Erbium kuchaytirgichli optik retranslyatorlarning
xarakteristikalari, funksional va tuzilish sxemalari keng namoyon etilgan.Erbium
kuchaytirgichining konstruktiv qurilishxususiyatlari va ishlash prinsipi ko'rsatilgan.
The article presents the results of solving the problem of attenuation of an optical signal in
fiber-optic communication lines. Widely used modern technical solutions of intermediate
amplification-regenerative nodes of fiber-optic communication lines are described. The
advantages and disadvantages of existing intermediate fiber optic amplifiers are presented. The
Техника фанлари ва инновация №2/2019 й. Technical science and innovation
162
benefits of optoelectronic signal regenerators include a full restoration of the original properties
of the optical signal. The optoelectronic regenerator allows to limiting the amount of internal
and external optical noise by acceptable values, but increases and increases the cost of building
optical fiber connections.Optical signal amplifiers are also used to increase the range of fiberoptic communication lines. The main advantage of intermediate fiber optic amplifiers is their
relatively simple design and, consequently, low cost, as well as high cost of losses and power
output.The technical function of the developed fiber optic amplifier is to create a signal and
power amplifier that is evenly distributed inside the fiber located in the region of the fiber
containing the fluorescent additive.The characteristics, functional and structural diagrams of an
optical repeater with erbium amplifiersare shown in detail. The design features of the
construction and the principle of operation of the erbium amplifier are described.
В статье приведены результаты решения проблемы затухания оптического сигнала
в волоконно-оптических линиях связи. Описаны широко используемые современные
технические решения промежуточных усилительно-регенерационных узлов волоконно-оптических линий связи. Показаны достоинствами и недостатки существующих
промежуточных волоконно-оптических усилителей. К достоинствам оптоэлектронных
регенераторов сигнала относится полное восстановление исходных характеристик
оптического сигнала. Оптоэлектронный регенератор позволяет ограничить величину
внутренних и внешних оптических шумов допустимыми величинами, но усложняет и
удорожает построение ВОЛС. Оптические усилители сигнала также используются для
увеличения дальности действия волоконно-оптических линий связи. Главным
достоинством промежуточных волоконно-оптических усилителей является их
относительно простая конструкция и, следовательно, невысокая стоимость, а также
большая величина коэффициента потерь и выходной мощности. Техническая задача
разрабатываемого волоконно-оптического усилителя - создание усилителя, в котором
происходит передача сигнала и энергии, по существу, аналогичное распределение в
волокне, которое также сконцентрировано в той области волокна, в которой
присутствует флуоресцентная присадка. Представлены характеристики,
функциональная и структурная схемы оптического ретранслятора с эрбиевыми
усилителями.Приведены конструктивные особенности построения и принцип работы
эрбиевого усилителя.
№ | Author name | position | Name of organisation |
---|---|---|---|
1 | Dadamatova K.T. | assistent | TDTU |
2 | Nazarov A.M. | professor | TDTU |
3 | Gerasimenko N.N. | professor | TDTU |
№ | Name of reference |
---|---|
1 | Pixtin A.N. Kvantovaya i opticheskaya elektronika. Komponenti VOLS. – M.: Abris, 2015. – pages -656. 2. Liu, C., Deng, L., Liu, D. & Su, L. Modeling of a single multimode fiber imaging system. arxiv:1607.07905. 2018. pages -310. 3. Turtaev, S. et al. High-fidelity multimode fibre-based endoscopy for deep-brain in vivo imaging. Light. Appl. 2018.№ 7. pages -92. 4. Takagi, R., Horisaki, R. & Tanida, J. Object recognition through a multimode fiber. Opt. Rev. 2017. №24. pages -117–120. 5. Borhani, N., Kakkava, E., Moser, C. &Psaltis, D. Learning to see through multimode Техника фанлари ва инновация №2/2019 й. Technical science and innovation 168 fibers. Optica. 2018. №5. pages -960. 6. Rahmani, B.Loterie, D.Konstantinou, G.Psaltis, D. & Moser, C. Multimode optical fiber transmission with a deep learning network. Light Appl. 2018. № 7 pages -69. 7. Fan, P., Zhao, T. & Su, L. Deep learning the high variability and randomness inside multimode fibres. Arxiv:1807.09351. 2018. pages -112-120. 8. Cheng PK, et al. Ultrafast soliton and stretched-pulse switchable mode-locked fiber laser with hybrid structure of multimode fiber based saturable absorber. Scientific Reports. 2019. doi: 10.1038/s41598-019-46658-y. 9. Wang L, et al. Femtosecond mode-locked fiber laser at 1 μm via optical microfiber dispersion management. Scientific Reports. 2018. pages -8-473. 10. Zhang Y, et al. Photonics and optoelectronics using nano-structured hybrid perovskite media and their optical cavities. Phys. Reports. 2019. pages -1–51. 11. Luo X, et al. Simple open-cavity pulsed Brillouin fiber laser with broadband supercontinuum generation. Appl. Phys. B. 2017. pages -123-259. 12. Muniz-Cánovas P, Barmenkov YO, Kir’yanov AV, Cruz JL, Andrés MV. ASE narrowband noise pulsing in erbium-doped fiber amplifier and its effect on self-phase modulation. Opt. Express. 2019. №27. pages -8520–8528. 13. Keppler, Sebastian; Sävert, Alexander; Körner, Jörg; Hornung, Marco; Liebetrau, Hartmut; Hein, Joachim; Kaluza, MalteChristoph. "The generation of amplified spontaneous emission in high-power CPA laser systems". Laser & Photonics Reviews. 2016. № 10. pages -264–277. 14. Iqbal, M. A., Al-Khateeb, M. A. Z., Krzczanowicz, L., Phillips, I. D., Harper, P. & Forysiak, W.Linear and Nonlinear Noise Characterisation of Dual Stage Broadband Discrete Raman Amplifiers. Journal of Lightwave Technology. 2019. № 34. pages -3679-3688. 15. Iqbal, M. A., Krzczanowicz, L., Philips, I. D., Harper, P. & Forysiak, W.Noise Performance Improvement of Broadband Discrete Raman Amplifiers Using Dual Stage Distributed Pumping Architecture.Journal of Lightwave Technology. 2019. №37. pages -3665-3671. 16. Dario Pilori, Luca Bertignono, AntoninoNespola, FabrizioForghieri, Marco Mazzini, and Roberto Gaudino. ―Bidirectional 4-PAM to Double Per-Fiber Capacity in 2-km IntraDatacenter Links‖. In: IEEE Photonics Journal 10.2. 2018. pages -1–10. 17. Dario Pilori, Luca Bertignono, AntoninoNespola, FabrizioForghieri, and Gabriella Bosco. ―Comparison of Probabilistically Shaped 64QAM With Lower Cardinality Uniform Constellations in Long-Haul Optical Systems‖. In: Journal of Lightwave Technology 36.2. 2018. pages -501–509. 18. Dario Pilori, Chris Fludger, and Roberto Gaudino. ―Comparing DMT Variants in Medium-Reach 100G Optically Amplified Systems‖. In: Journal of Lightwave Technology 34.14. 2016. pages -3389–3399. 19. A. Almukhtar, A. Al-Azzawi, S. DASb, A. Dhar, M. Paul, Z. Jusoh, et al.Efficient Lband erbium-doped fiber amplifier with zirconia-Yttria-Aluminum co-doped silica fiber. J Non-Oxide Glasses № 10.2018. pages - 65-70. 20. A. Markom, M.C. Paul, A. Dhar, S. Das, M. Pal, S.K. Bhadra, et al.Performance comparison of enhanced Erbium–Zirconia–Yttria–Aluminum co-doped conventional erbium-doped fiber amplifiers. Optik-Int J Light Electron Opt, 132. 2017. pages- 75-79. |