Regeneration of used engine oil is an urgent task of petro chemistry. The
methods of processing and regeneration of motor oils are considered. Literary analysis has
shown that the processing and regeneration of used motor oils is divided into physical, physiochemical,
chemical and combined groups. Of these four groups, the best chemical and
combined. A small theoretical analysis was carried out on the nuances of processing used
motor oils.
Theoretically, a small percentage of additives can be retained in the oil or its recycled
product. The general scheme of waste oil regeneration processing is given. The process is
carried out in special oil separators. To accelerate it, heat treatment can be used, that is,
heating the liquid to about 85 - 90 degrees. Motor oil regeneration methods produce a product
that is recyclable and practically does not differ in its characteristics from oil produced from
crude oil. Methods for coarse and fine purification of used oils, such as multifunctional
filtration, centrifugation, coagulation, adsorption purification, ion-exchange purification,
selective regeneration, sulfuric acid purification and hydrogenation, are considered. Based on
used oils, a method has been developed for obtaining a high-quality composite lubricant for
the needs of agricultural machinery
Regeneration of used engine oil is an urgent task of petro chemistry. The
methods of processing and regeneration of motor oils are considered. Literary analysis has
shown that the processing and regeneration of used motor oils is divided into physical, physiochemical,
chemical and combined groups. Of these four groups, the best chemical and
combined. A small theoretical analysis was carried out on the nuances of processing used
motor oils.
Theoretically, a small percentage of additives can be retained in the oil or its recycled
product. The general scheme of waste oil regeneration processing is given. The process is
carried out in special oil separators. To accelerate it, heat treatment can be used, that is,
heating the liquid to about 85 - 90 degrees. Motor oil regeneration methods produce a product
that is recyclable and practically does not differ in its characteristics from oil produced from
crude oil. Methods for coarse and fine purification of used oils, such as multifunctional
filtration, centrifugation, coagulation, adsorption purification, ion-exchange purification,
selective regeneration, sulfuric acid purification and hydrogenation, are considered. Based on
used oils, a method has been developed for obtaining a high-quality composite lubricant for
the needs of agricultural machinery
| № | Муаллифнинг исми | Лавозими | Ташкилот номи |
|---|---|---|---|
| 1 | Amirkulov N.S. | teacher | TSTU |
| 2 | Baxtiyorov J.S. | teacher | TSTU |
| № | Ҳавола номи |
|---|---|
| 1 | V.I. Yuzefovich. Organization of the collection of waste oils. “World of Oil Products”, 2013. 28 |
| 2 | “The method of regeneration of used lubricating oil, accepted application of France”, 1975. 10 |
| 3 | Z.L. Finkelstein. Oil cleaning with hydrodynamic filters. “Collection of scientific papers”, 2011. 44 |
| 4 | A.Kh. Mazhidov., K.A. Sharipov. “Recommendations for the organization of waste oils processing in the operating conditions of machines”, 2018. 14 |
| 5 | V.P. Kovalenko., K.V. Rybakov. Regeneration of waste oils and their reuse. “Overview info state agro prom of the USSR”, 1989. 25 |
| 6 | U.T. Iskanderov., K.A. Sharipov. Purification of used oils by the bar membrane method. “Rural economy of Uzbekistan”, 2017. 51 |
| 7 | Kh.R. Rakhimov. “Substantiation of technological parameters of glass fiber filters for dehydration of used automotive and tractor motor oils”, 2010. 133 |
| 8 | A.V. Lensky., A.P. Bystritskaya., Y. Nikanov. “Electromagnetic filters for cleaning oils, tractors and agricultural machines”, 2017. 6 |
| 9 | B.N. Khamidov., B.B. Rakhimov. Gear lubricant properties and requirements. Materials of the republican scientific and practical conference with international participation of scientists on the topic. “Actual problems of chemical technology”, 2021. 315 |
| 10 | Sh.A. Alikabulov., B.A. Shukurullaev., B.B. Rakhimov. Basic characteristics and manufacture of gear lubricating oils. Republican scientific practical conference “Problems of ecology and safety and their solutions”, 2021. 248 |
| 11 | I.V.Kiselev. “Method of production of light beer”, 2012 |
| 12 | A.Parenti, P. Spugnoli, L. Calamai, S.Ferrari, C. Gori. “Euro food res technology”, 2004. 360 |
| 13 | Z.Sh Sapaeva., S.T. Tuychieva. Oxidation processes of wines. “Winemaking And viticulture”, 2006. 40 |
| 14 | R.S. Reshetova. Electromagnetik processing during beet storage and processing. “News of university food technology”, 2011. 123 |
| 15 | A.A. Gukhman. Introduction to the theory of similarity. “Higher School”. 1973. 254 |
| 16 | Y.V. Trofimenko. “Utilization of automobiles”. 2011. 336 |