he paper presents the basic requirements for smart sensors, methods for
implementing smart measuring tools. The principle of operation of sensors, their block
diagram, the possibilities of storing information and the features of their operation and the
advantages of using such sensors in an industrial automation system, namely in automated
process control systems, are given. When designing smart sensors, the possibility of
compensating for the influencing parameters of the controlled system, which is not stable
within acceptable limits, should be taken into account and should include the ability to work
with various input sensors. Smart sensors should spend as little time as possible on their
calibration. The auto-calibration structure for smart sensors should fine-tune parameters such
as offset, gain change, etc. with high accuracy. The proposed smart sensor can adapt to
operating conditions and continuously adjust its operation in order to achieve maximum
efficiency. The modern Proposed intelligent sensor processes data not only of the output
signal, but also of additional parameters of the primary converter, which allows continuous
diagnostics, fault tracking and drawing conclusions about the reliability of measurements. The
diagnostics include monitoring the stability of the object and the state of the sensor, as well as
tracking a signal that is too weak, warning of the danger of a complete sensor failure. The
structure of the intelligence of intelligent converters is considered, including the functions of
decision-making, recognition and rejection of signals, as well as the functions of normalization
and signal correction. An algorithm for correcting and compensating signals developed on the
basis of TEDS (Transducer Electronic Data Sheet) technology is proposed, which includes
studying the form of measurement errors, introducing the form of errors into this algorithm
and storing corrective information for this sensor.
he paper presents the basic requirements for smart sensors, methods for
implementing smart measuring tools. The principle of operation of sensors, their block
diagram, the possibilities of storing information and the features of their operation and the
advantages of using such sensors in an industrial automation system, namely in automated
process control systems, are given. When designing smart sensors, the possibility of
compensating for the influencing parameters of the controlled system, which is not stable
within acceptable limits, should be taken into account and should include the ability to work
with various input sensors. Smart sensors should spend as little time as possible on their
calibration. The auto-calibration structure for smart sensors should fine-tune parameters such
as offset, gain change, etc. with high accuracy. The proposed smart sensor can adapt to
operating conditions and continuously adjust its operation in order to achieve maximum
efficiency. The modern Proposed intelligent sensor processes data not only of the output
signal, but also of additional parameters of the primary converter, which allows continuous
diagnostics, fault tracking and drawing conclusions about the reliability of measurements. The
diagnostics include monitoring the stability of the object and the state of the sensor, as well as
tracking a signal that is too weak, warning of the danger of a complete sensor failure. The
structure of the intelligence of intelligent converters is considered, including the functions of
decision-making, recognition and rejection of signals, as well as the functions of normalization
and signal correction. An algorithm for correcting and compensating signals developed on the
basis of TEDS (Transducer Electronic Data Sheet) technology is proposed, which includes
studying the form of measurement errors, introducing the form of errors into this algorithm
and storing corrective information for this sensor.
| № | Ҳавола номи |
|---|---|
| 1 | O. Andreau., I. Koutiri., P. Peyre., J.D. Penot., N. Saintier., E. Pessard., T. De Terris., C. Dupuy., T. Baudin. Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting. “Mater. Process. Technology”, 2019. 21. |
| 2 | N.R. Yusupbekov., U.A. Ruziev., M. K. Shodiev. Multi-model intellectual virtual Analysers of Parameters of Technological Processes. Journal “Advances in Intelligent Systems and Computing. Switzerland. “Springer Nature”, 2021. 121. |
| 3 | D. Johnson., X. Zhang. Protecting a low voltage direct current system using solid-state switching devices for DC grid applications. “Advances in systems science and applications”, 2019. 44 |
| 4 | S. Dryepondt., P. Nandwana., P. Fernandez-Zelaia. “Microstructure and high temperature tensile properties of 316L fabricated by laser powder-bed fusion”, 2020. 1723. |
| 5 | K. Chetpattananondh., T Tapoanoi., P Phukpattaranont., N Jindapetch. A selfcalibration water level measurement using an interdigital capacitive sensor. “Sensors and Actuators”,2014. 175. |
| 6 | N.D. Sims., P.V. Bayly., K.A. Young. Piezoelectric sensors and actuators for milling tool stability lobes. “Journal of sound and Vibration”, 2015. 743. |
| 7 | J. Rangel-Magdaleno., R.R. Troncoso., R.O. Rios., E.C. Yepez. “Novel oversampling technique for improving signal-to-quantization noise ratio on accelerometer-based smart jerk sensors in CNC applications. Sensors”, 2009. 3767 |
| 8 | J. Courbat., Y.B. Kim., D. Briand., N.F. Rooij. Inkjet printing on paper for the realization of humidity and temperature sensors. “Proceedings Transducers” 2011. 1356 |
| 9 | B. Beirow., A. Ku hhorn., J. Nipkau. On the Influence of strain gauge instrumen-tation on blade vibrations of Integral Blisk compressor rotors applying a discrete model. “Structures and Dynamics, Parts A and B ASMEDC”, 2009. 245. |
| 10 | K.A. Kurniadi., L. Sangil., R. Kwangyeol. Digital Twin Approach for Solving Reconfiguration Planning Problems in RMS / Proceedings of IFIP WG 5.7 International Conference “Advances in Production Management Systems. “Smart Manufacturing for Industry 4.0, APMS”, 2018. 327. |
| 11 | J.A. Caballero. Logic hybrid simulation-optimization algorithm for distillation design. “Computers and Chemical Engineering”, 2015. 284. |
| 12 | N.R. Yusupbekov., F.A. Abdurasulov., F.T. Adilov., A.I. Ivanyan. Concepts and methods of “digital twins” models creation in industrial asset performance management systems. “Journal advances in intelligent systems and computing”, 2021. 1589. |
| 13 | P. Malcovati., C.A. Leme., P. O´Leary., F. Maloberti., H. Baltes. Smart sensor interface with A/D conversion and programmable calibration. “IEEE Journal of solid state circuits”, 2014. 963. |
| 14 | M. Yamada., K. Watanabe. A capacitive pressure sensor interface using oversampling. Demodulation techniques. “IEEE transaction instrumentation and measurement”, 2017. 46 |
| 15 | S.A. Zubeer., M.A. Omar. Performance analysis and electrical production of photovoltaic modules using active cooling system and reflectors. “Ain shams engineering journal”, 2020. |
| 16 | M.H.R. Rahman., R. Devanathan., Z. Kuanyi. Neural network approach for linearizing control of nolinear process plant. “IEEE transactions on industrial electronics”, 2012. 470 |
| 17 | D. Estrin., L. Girod., G. Pottie., M. Srivastava. “Instrumenting the world with wireless sensor networks. “Proceedings of the international conference on acoustics, speech, and signal processing”, 2011. 2033. |
| 18 | G. Pottie., W. Kaiser. Wireless integrated network sensors. “Communications of the ACM 43”, 2000. 51. |