65

In mechanical engineering, particularly machine tool building, magnetically
controlled sealed reed contacts are becoming widespread. They are used in devices with electrical
and mechanical control; the latter include encoders of positions or displacements(CDS).The
technical and operational characteristics of the CDS are determined by the method of reading
information from the cadascal scale and the type of scale. Some characteristics of the reed
switches used in the CDS are given on the 1st table.On the 2nd table , the main ways of reading
information are summarized - contact, non-contact, as well as reading by reed switches, that called
Magneto-resistive Sensors. MRS combines the advantages of contact and non-contact reading methods: the simplicity of the CDS design and high reliability. Compared to contactless reading
methods, MRS has advantages in characteristics and output signals (they do not require formation
and amplification) and in other maximum permissible operational values (the ability to work when
exposed to dust, moisture, radiation, oil, significant vibration and shock loads, as well as over a
wide temperature range).
 

  • Internet ҳавола
  • DOI
  • UzSCI тизимида яратилган сана 13-09-2023
  • Ўқишлар сони 65
  • Нашр санаси 11-09-2023
  • Мақола тилиIngliz
  • Саҳифалар сони116-121
English

In mechanical engineering, particularly machine tool building, magnetically
controlled sealed reed contacts are becoming widespread. They are used in devices with electrical
and mechanical control; the latter include encoders of positions or displacements(CDS).The
technical and operational characteristics of the CDS are determined by the method of reading
information from the cadascal scale and the type of scale. Some characteristics of the reed
switches used in the CDS are given on the 1st table.On the 2nd table , the main ways of reading
information are summarized - contact, non-contact, as well as reading by reed switches, that called
Magneto-resistive Sensors. MRS combines the advantages of contact and non-contact reading methods: the simplicity of the CDS design and high reliability. Compared to contactless reading
methods, MRS has advantages in characteristics and output signals (they do not require formation
and amplification) and in other maximum permissible operational values (the ability to work when
exposed to dust, moisture, radiation, oil, significant vibration and shock loads, as well as over a
wide temperature range).
 

№ Муаллифнинг исми Лавозими Ташкилот номи
1 Mamadjonov A.M. teacher TSTU
2 Jurayeva N.A. researcher TSTU
№ Ҳавола номи
1 K.A. Arushanov., I.A. Zelser. Hardware and Technological aspects of the Gerkonov creation with Nano structured Contact surfaces (in Russian). “Bulletin of Ryazan state radio engineering university”, 2009. 90.
2 S.A. Gorji., H.G. Sahebi., M. Ektesabi., A.B. Rad. Topologies and control schemes of bidirectional DC-DC power converters: An Overview. “IEEE Access”, 2019. 117997.
3 M. Salem., K. Yahya. Resonant Power Converters. “In electric power conversion intechopen: London”, UK, 2019.
4 B.M. Reddy., P.A. Samuel. Comparative Analysis of Non-Isolated Bi-Directional Dc-Dc Converters. “In Proceedings of the IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES)”, Delhi, India 2016. 6.
5 O. Junge., J.E. Marsden., S. Ober-Bl¨obaum. Discrete mechanics and optimal control. “In IFAC Congress”, Praha, 2005. 47
6 F. Bullo., A.D. Lewis. “Geometric control of mechanical systems, volume 49 of Texts in Applied Mathe- matics. Springer-Verlag”, New York, 2005.
7 A.F. Miguel., M.G. Samuel., E. Peres., R.C. Carlos., A.L. Juan., P.J. Ferreira., M.J. Reis., R. Morais. A framework for wireless sensor networks management for precision viticulture and agriculture based on IEEE 1451 standard. “Computers and electronics in agriculture”, 2013. 19.
8 J.E. Marsden., M. West. Discrete mechanics and variational integrators. “In Acta Numerica”, Cambridge University Press, 2001. 317
9 M.Y. Kletsel., A.G. Kaltaev., B.E. Mashrapov. Differential-phase protection of the powerful electric motors on reed beds (in Russian). “Scientific problems of Siberia and far east transport”, 2014. 306.
10 R. Ortega., M.W. Spong., F. Gomez-Estern., G. Blankenstein. Stabilization of a class of underactuated mechanical systems via interconnection and damping assignment. “IEEE Trans. on Autom. Contr”, 2002. 1218.
11 M.H. Rashid. “Power electronics handbook; butterworth-heinemann”, Oxford, UK, 2018.
12 E. Kabalci. “Multilevel inverters: control methods and advanced power electronic applications; Elsevier”, Amsterdam, Netherlands, 2021.
13 F. Bullo., A.D. Lewis. Geometric control of mechanical systems, volume 49 of Texts in Applied Mathematics. “Modeling, analysis, and design for simple mechanical control systems”, Springer-Verlag, New York, 2005.
14 D.N. Koksharov., D.A. Rusin. Development of improved reed design of reed gerkons with improved quality indicators. Scientific and Technical Bulletin of the St. Petersburg State University of Information Technologies. “Mechanics and optics”, 2006. 270.
15 N. Zhang., D. Sutanto., K.M. Muttaqi. A review of topologies of three-port DC-DC converters for the integration of renewable energy and energy storage system. Renew. Sustain. “Energy Review”, 2016. 388.
Кутилмоқда