In this article, the dependence of the main technological and structural factors on
the tension of the thread during the process of winding the cooked thread was studied. The analysis
of the field studies shows that various cooking characteristics are used to widen the range of textile
yarns, to obtain spun yarns by joining two or more single yarns in uniform tension, to evaluate the
mechanical properties of yarns during the spinning process. Thread tension and its dispersion are of
particular importance in the cooking process, because their values are the factors that determine the
stability of the cooking process. Therefore, it is desirable to study the characteristics of cooking textile
yarns, to coordinate and adjust many technological processes, and to determine them depending on
the scale of use. Determining the structure and composition of textile yarns is of great practical
importance, and also helps to solve complex problems in the design of yarns with given properties.
Knowledge of cooking characteristics and their management is necessary for the production of highquality products and the design of modern equipment. The results of research work and the
dependence of structural factors on thread tension were developed. That is, the reduction of the
tension dispersion leads to the stabilization of the spinning process. Appropriate recommendations
were made for the dependence of the main technological and structural factors on the tension of the
thread in the process of winding this cooked yarn.
In this article, the dependence of the main technological and structural factors on
the tension of the thread during the process of winding the cooked thread was studied. The analysis
of the field studies shows that various cooking characteristics are used to widen the range of textile
yarns, to obtain spun yarns by joining two or more single yarns in uniform tension, to evaluate the
mechanical properties of yarns during the spinning process. Thread tension and its dispersion are of
particular importance in the cooking process, because their values are the factors that determine the
stability of the cooking process. Therefore, it is desirable to study the characteristics of cooking textile
yarns, to coordinate and adjust many technological processes, and to determine them depending on
the scale of use. Determining the structure and composition of textile yarns is of great practical
importance, and also helps to solve complex problems in the design of yarns with given properties.
Knowledge of cooking characteristics and their management is necessary for the production of highquality products and the design of modern equipment. The results of research work and the
dependence of structural factors on thread tension were developed. That is, the reduction of the
tension dispersion leads to the stabilization of the spinning process. Appropriate recommendations
were made for the dependence of the main technological and structural factors on the tension of the
thread in the process of winding this cooked yarn.
| № | Муаллифнинг исми | Лавозими | Ташкилот номи |
|---|---|---|---|
| 1 | ADASHEV B.M. | teacher | , Namangan Engineering and Technology Institute |
| № | Ҳавола номи |
|---|---|
| 1 | 1. И.Г.Борзунов, К.И.Бадалов, В.Г.Горчаров, Т.А.Дугинова, Н.И. Шилова. (1986). Прядение хлопка и химических волокон (изготовление ровнисы, суровой и меланжевой пряжи, крученых нитей и ниточных изделий), -2-е izd., перераб. И dop.- M.: Легпромбытиздат, -392 с. |
| 2 | 2. Е.Д. Ефремов (1958). «Влияние толщины нити и геометрических параметров органов машины на натяжение нити» - Технология легкой промышленности, Известия вузов, №6. |
| 3 | 3. В.С.Живов. Уравнение Дарбу в кинематике гибкой растяжимой нити. Известия вузов Машиностроение. (1969).№9 |
| 4 | 4. И.И.Мигушов. Механика текстилной нити и ткани: Монография. –M.: Легкая индустрия, (1980). - 160 |
| 5 | 5. С.Г.Зарескас. Механические свойства нити при кручении. –Москва,“Легкая индустрия”, (1979). 184с |
| 6 | 6. В.М.Каган. Взаимодействие нити с рабочими органами текстилных машин. – M.: Легкая и пищевая промышленност, (1984) 54-57 с |
| 7 | 7. D.F.Arthur, A.F.Welbr (1960). The principles of friction twisting-J.Text.Jnst., V.51.№2 P.T66-T72. |
| 8 | 8. H.Deussen. Jorn preparation for shutleles looms, - Canad Textile Journal, (1979 October). P30-32,35-4 |
| 9 | 9. Ю.К.Бархоткин. Натяжения нити на новом крутилном устройстве. Известия вузов, Технология текстилной промышленности. (2004). №3 (278) С. 28- 31. |
| 10 | 10. В.А.Ворошилов. Влияние массы бегунка на натяжение нити на колсевой прядилной. Известия вузов. Технология текстилной промышленности, (2003) №1. С 44-47 |
| 11 | 11. М.Эргашев, Г.Б.Абдиева. Исследование динамических процессов при формировании ткани с учетом их реологических свойств., Проблемы текстиля, (2002). №1, с 45 |
| 12 | 12. Г.Н.Кукин, А.Н.Соловьев. Текстильное матераловедение., (1964). M., “Легкая индустрия” 374 с. |
| 13 | 13. В.П.Щербаков, О.Ю.Дмитриев, И.Б.Сыганов, Н.С.Скуланова, Е.Р.Скуланова. “Теоретические основы и эксперименталное определение жесткости нити при кручении и изгибе”, №1 (343) Тьехнология текстилной промышленности. (2013). с 156-161. |
| 14 | 14. В.П.Щербаков. Расчет прочности пряжи с применением теории упругости анизотропного тела. Известия ВУЗов, Технология текстилной промышленности. (1996). -Москва, №6, с-10-13 |
| 15 | 15. Т.И.Винокурова, С.М.Кирюхин, Е.Ф.Федорова. Определение компонентов деформатсии при растяжении хирургических нитей. Известия вузов. Технология текстилной промышленности. (2004). №6. - С. 21-24. |
| 16 | 16. Б.М.Рыбакова, А.Ф.Нечаев (1957). Прибор для определении жесткости пряжи. Текстилная промышленност, №4, s.41-43 |