244

  • Ссылка в интернете
  • DOI
  • Дата создание в систему UzSCI 21-10-2020
  • Количество прочтений 220
  • Дата публикации 20-06-2020
  • Язык статьиO'zbek
  • Страницы161-166
Ключевые слова
English

The article explores the structure of the grinding machine, which is a pole to the body, and the disk to the disk with a screwdriver and a toothbrush, and to the shaft with a disc and a screwdriver. On the upper side of the body of the machine is placed an anchor at an inclined angle. The tooth is used as a working element and can be adjusted using a rack in the process of researching the disc. We also paid attention to the creation of a machine: the analysis of scientific resources in this area, the technological process being studied in a laboratory setting. The following research has been carried out to develop a model of stone crusher model and some of its dimensions: an overview of the existing technology of building work, the study of some properties of stones, the optimal methods of building work, the diameter and weight of stone. The technological process of the machine is studied; the performance of the new machine is calculated. Experimental tests have shown that the total crushing of a machine with a 2.0-fold increase compared to existing machines will increase by 2.0 times. Thus, based on the results of our preliminary experiments, we came to the following conclusions: The creation of a grinding machine allows for the shortest period of construction work. Unless the creation of a crushing machine does not require the creation of precious stone crushers.

 

№ Название ссылки
1 . Critical analysis, strict discipline and personal responsibility must be the daily routine of each leader's activities. Speech by President of the Republic of Uzbekistan Shavkat Mirziyoev at the extended meeting of the Cabinet of Ministers devoted to the main results of socio-economic development of the country in 2016 and the most important priorities of economic program for 2017. // Public Speech, January 16, 2017, No.1.
2 . Rakhimov KE The need to improve road construction in Uzbekistan - // Collection of materials of the Republican scientific and technical conference "Prospects for the development of transport and road complex in the south of the republic". Termez: Terdu, March 29-30, 2017. 270-273 b.
3 Karimov RR, Imanov BB, Karimov YZ, Choriev GN Heating of cones // Сборник materialsов Международной Научно-техническое Conference on the subject "Modern Materials, Technical and Technology in Machine Building" 19-20 April 2014 года. Andijan. Андижанский машиностроительного институт. –S. 147–150.
4 Karimov RR, Imanov BB, Karimov YZ, Abulova MR К изледованию иенусообразному рабочим fgenom mini-izmelchitelya для губых кормов // "Toshdtu news" magazine, Tashkent; Toshdtu, No. 3, 2013, pp. 123-126.
5 . Karimov RR, Abdullaev JE, Ishmuratov SS, Ergashev RD Mini-grinder research for rough fodder // International Journal of Advanced Research in Science, Engineering and Technogy. Vol.6, Issue 4, April 2019, ISSN: 2350-0328; Copyrigh to IJARSET WWW / IJARSET.COM 8658-8662 p.
6 Karimov R.R. Observational technology scheme and parameters preserving kenofouborochnomu combine KU-0,2 for the nevalok nistoy frequency stebley kenofe. Autograph. Diss… .kond., Techn., Nauk.-yangiyul, 1995. 16s.
7 . A.S. SU # 123673. Relative organ valkovoy drobilki. / Goldobin A.S. zaev. 06.11.84. Opubl.15.05.86. Bulletin. No. 18.
8 A.S. SU # 1319898. Valkovaya drob. / Yes Barabanov, V.G. Litvinov, L.M. Nemsimonii, V.G. Loshnov. Zayav. 03.01,86. Opubl 30.06.87. Bulletin No. 24.
9 A.S. SU # 1296215. Valok vomavaya drobka / F.L. Laevsky, B.D. In Lagoda, I.D. Faiman, W. P. Wahno. zaev. 17,10,85, Opubl. 15.03.87 Byul. No. 10.
10 . Ustroystva for droleniya and izmelcheniya. / Karimov. RR, Gapparov Sh.K., Eshquvatov U.A., Ergashev RD
11 Karimov RR, Yadgarov SN, Kurbonov JE Study of technological parameters and basic dimensions of the crushing machine. November 30, 2019
12 . Karimov RR, Abdykadirov Sh.A., Yadgarov SN Developing technology schema machine for the mix. // Proceedings of the Republican Scientific and Technical Conference "Energy Efficiency-2019" December 21, 2019, Tashkent, TSTU.
13 A. S. 1230673. Rib body with valicovoy drobilki / Goldobin A. S. // V 02 S 4/30, 13/28.
14 Shaturaev, J., 2014. Comparative Study on Similarities and Differences of Teaching and Learning Process in Primary Schools in Indonesia and Uzbekistan (Doctoral dissertation, Universitas Pendidikan Indonesia).
15 Yadgarov SN, Abdurakhmanov Yu.T. Road resistance of asphalt concrete pavement. // Proceedings of the International Scientific and Technical Conference "Prospects for the Development of Road Transport and Engineering Communication Infrastructure", Tashkent, -2017, -S. 124-126.
16 Yadgarov SN, Saparov Sh.Sh. Influence of climatic factors on the formation of wheel trail deformation on asphalt concrete paved roads. // Proceedings of the international scientific-technical conference on "Innovations in construction, energy-efficient technologies, construction and seismic safety of buildings and structures" - Tashkent, -2019, -S. 177–180.
17 Yadgarov SN, MS Rakhimov. Development of a technological image of a stone crushing machine. // 8th Republican scientific conference "Prospects of development of science in the XXI century and role of innovation in them" - Tashkent, -2019, №2. –S595-161.
В ожидании