The article discusses the adsorption methods of desulfurization based on the ability of hydrogen sulfide to be sorbed on the surface of solids.
There are two main desulfurization methods, depending on the absorber used - these are adsorption processes based on the extraction of gas components with solid absorbents - adsorbents and absorption processes in which the extraction of acidic components is carried out by liquid absorbents.
The choice of the process for purifying natural gas from sulfur compounds depends on many factors, the main of which are: the composition and parameters of the feed gas, the required degree of purification and the area of use of commercial gas, the availability and parameters of energy resources, production waste, etc.
In connection with the introduction of a new standard for gas quality, it is necessary to bring gas quality up to the requirements of the state standard O'z DSt 948 for the content of hydrogen sulfide (no more than 5 mg/m3) and mercaptans (no more than 15 mg/m3).
To ensure the required quality characteristics of the gas, it is planned to purify it from hydrogen sulfide and mercaptans.
The 13X molecular sieve was modified with copper ions, after which the molecular sieve acquired such properties as high sulfur capacity, easy regeneration, low cost, high efficiency of mercaptan adsorption.
The article discusses the adsorption methods of desulfurization based on the ability of hydrogen sulfide to be sorbed on the surface of solids.
There are two main desulfurization methods, depending on the absorber used - these are adsorption processes based on the extraction of gas components with solid absorbents - adsorbents and absorption processes in which the extraction of acidic components is carried out by liquid absorbents.
The choice of the process for purifying natural gas from sulfur compounds depends on many factors, the main of which are: the composition and parameters of the feed gas, the required degree of purification and the area of use of commercial gas, the availability and parameters of energy resources, production waste, etc.
In connection with the introduction of a new standard for gas quality, it is necessary to bring gas quality up to the requirements of the state standard O'z DSt 948 for the content of hydrogen sulfide (no more than 5 mg/m3) and mercaptans (no more than 15 mg/m3).
To ensure the required quality characteristics of the gas, it is planned to purify it from hydrogen sulfide and mercaptans.
The 13X molecular sieve was modified with copper ions, after which the molecular sieve acquired such properties as high sulfur capacity, easy regeneration, low cost, high efficiency of mercaptan adsorption.
№ | Имя автора | Должность | Наименование организации |
---|---|---|---|
1 | Rakhataliev A.M. | илмий ҳодими | «O’ZLITINEFTGAZ» АЖ |
№ | Название ссылки |
---|---|
1 | Ayrapetyan L.R., Uryupin V.V., Reconstruction of the complex gas treatment unit in Uchkyr. Issue 2 2007. Scientific and technical "Uzbek Journal of Oil and Gas" NHC "Uzbekneftegaz". Tashkent. 2007 |
2 | . 2015SAS 5542:2014 Natural fuel gases for commercial and domestic use. Specifications |
3 | L.S.Eshchenko Technology of catalysts and adsorbents, Minsk, |
4 | O'z DSt 948: 2016 "Combustible natural gases supplied to the main gas pipelines transported through them." |
5 | Gritsenko A.I., Galanin I.A., Zinovyeva L.M., Murin V.I. Purification of gases from sulfur compounds during the operation of gas fields. Moscow: Nedra, 1985.270 p. |
6 | Molchanov S.A. Purification of natural gas from moisture and sulfur compounds // Journal: Science and technology in the gas industry. - M., 2004. - No. 4. - S. 25-30 |
7 | Speransky B.V., Burmistrov A.G., Istomin V.A. Improvement of systems for collecting hydrogen sulfide-containing gases at the final stage of field exploitation // OI. Ser.: Preparation and processing of gas and gas condensate. - M.: VNIIEgazprom, 1988. - No. 10. - S. 3-38. |
8 | N.A. Makarevich, N.I. Bogdanovich, Theoretical Foundations of Adsorption: Adsorption and Adsorption Forces, Arkhangelsk, 2015, p. 18. |
9 | Barash Yu.S. Van der Waals forces. - M.: Nauka, 1988.- 344 p. |
10 | Bessoniy E.A., Mashkovtsev P.D., Mikhailov A.V., Sidorov V.M., Vertical adsorber with a fixed bed of adsorbent, 2014 |
11 | Brunauer S. Adsorption of gases and vapors. M., 1948. |
12 | Boer Ya. De. The dynamic nature of adsorption. M., 1962; |
13 | Dubinin M.M. Adsorption and porosity. M., 1976; |
14 | Adamson A. Physical chemistry of surfaces. - M.: Mir, 1979. |
15 | Greg S., Sing K. Adsorption, specific surface area, porosity. - M.: Mir, 1984. |