. Uzbekistan produces a number of high-performance agricultural machinery. One of these agricultural machines is the "Dominator 130" combine harvester. Although these machines have been produced in Uzbekistan for about 14 years, there are still some problems during its operation. This article presents the results of the study carried out to determine failures occured during operation of the Dominator-130 and the analysis of the problems, as well as the recommendations for the problem troubleshooting. The specific recommendations are given for the elimination of some certain components and aggregates. The reasons for the most breakdowns that occur in combines are the climatic conditions of Uzbekistan. The definite troubleshooting measures are proposed in the article. The suggested methods for identifying and troubleshooting should increase the machine's performance during its exploitation.
. Uzbekistan produces a number of high-performance agricultural machinery. One of these agricultural machines is the "Dominator 130" combine harvester. Although these machines have been produced in Uzbekistan for about 14 years, there are still some problems during its operation. This article presents the results of the study carried out to determine failures occured during operation of the Dominator-130 and the analysis of the problems, as well as the recommendations for the problem troubleshooting. The specific recommendations are given for the elimination of some certain components and aggregates. The reasons for the most breakdowns that occur in combines are the climatic conditions of Uzbekistan. The definite troubleshooting measures are proposed in the article. The suggested methods for identifying and troubleshooting should increase the machine's performance during its exploitation.
| № | Имя автора | Должность | Наименование организации |
|---|---|---|---|
| 1 | Xudoyberdiyev M.A. | Assistant | TDTU |
| 2 | Yunuskhodjaev S.T. | dotsent | TDTU |
| № | Название ссылки |
|---|---|
| 1 | О. Hamroqulov, Sh. Magdiyev. Technical exploitation of cars. -Тashkenт 2015.- 221p. |
| 2 | Q.M. Sidiqnazarov. News in the field of autotranspoert. Training manual. - Тashkenт.Tashkent automobile roads Institute: 2016. -86 p. |
| 3 | . Ishmuratov K.K., Irgashev, B.A Assessment of the Wear Resistance for Gearwheel Teeth in an Open Toothed Gear under the Conditions of a High Level of Dust. Journal of Friction and Wear. Volume 41, Issue 1, 1 January 2020, Pages 85-90. |
| 4 | Mirzayev N.N., Kudoyberdiyev М.А., Khamroyev R.K. Theoretical Research Of The Technical Operation Indicators Of Grain Transportation Of New Generation High-Capacity Trucks. Test Engineering and Management. ISSN: 0193-4120, Volume 83 Issue – March/April 2020, 30 April 2020. Pages 54-60. |
| 5 | Irgashev, B.A., Irgashev, A.I. Forecasting the consumption of spare parts in machines based on the content of wear particles in oil Journal of Friction and Wear 36(5), с. 2015 441 -447. |
| 6 | Mirzayev Q.Q., Irgashev A. Wear resistance of rolling-ball bearings operating in an abrasive medium. Journal of Friction and Wear. Volume 35, Issue 5, 24 October 2014, Pages 439-442. |
| 7 | Astanakulov K., Hamroyev R. "Indicators of the technological process of grain transportation by new generation trucks" Internauka scientific journal-Moscow, 2019. - N. 8 (90). – P. 75-78. |
| 8 | Obidov S., Khamroyev R. “Features of MAN trucks and the possibility of their use in the transportation of grain.” Internauka scientific journal-Moscow, 2019. - No. 19 (101). - B. 75-76. |
| 9 | Tashmirzayev M. A. Khamrayev, R. K. "Features of new generation trucks and the possibility of their use for the transport of grain” Materials of the International scientific and practical conference "Problems of increasing the efficiency of electric energy use in agricultural sectors", Tashkent. November 28, 2018. Pages 856-859. |
| 10 | Astanakulov K. D., Karaev S. The current state of cultivation and harvesting of grain crops with an Ear / / collection of materials of the scientific and practical conference of senior researchers and young scientists. Part I.-Pages 68-71. |
| 11 | Toshboltayev M. Adjust and efficient use of cotton and grain machinery. Training manual. – Tashkent 2012. – 100. |
| 12 | JSC "Tashkent tractor plant”," tractors TTZ-80.10, TTZ-80.11 technical description, instructions and maintenance”, Tashkent. 228 P. |
| 13 | Mahkamov Q. The basics of machine punctuality. Tashkent. 2015. - 179 p. |
| 14 | Jo’rayeva G.Sh. Structure of agricultural machinery. Training manual. Tashkent. 2019. -211 p. |
| 15 | Ikramov U.A., Irgashev A., Makhkamov K.Kh. Calculation model to assess wear resistance of tooth gears. Trenie i Iznos. Volume 24, Issue 6, 2003, Pages 620-625. |