This study delves into the analysis of cutting forces in axial-compliant systems,
focusing specifically on the comparison between axially spring-compensated 90° conical tools and
rigid chamfering tools. The research incorporates a predictive model for chamfer size calculation in
the axially spring-compensated tools, verified through experimental tests on representative parts. The
study aims to control chamfer size within tolerances by adjusting process conditions and optimizing
processing efficiency. By exploring the fundamentals of the chamfering process, this research offers
insights into breaking sharp edges on components with positional errors and shape deformations,
with a particular emphasis on aero-engine casings. The integration of theoretical modelling and
experimental validation enhances the understanding of force performance, chamfer size, and process
parameters such as feeds and cutting speed. Through the use of representative test parts made of
Inconel 718, commonly used in aero-engine manufacturing, this work contributes to advancing the
knowledge and practical applications in chamfering operations and edge finishing in the
manufacturing industry.
This study delves into the analysis of cutting forces in axial-compliant systems,
focusing specifically on the comparison between axially spring-compensated 90° conical tools and
rigid chamfering tools. The research incorporates a predictive model for chamfer size calculation in
the axially spring-compensated tools, verified through experimental tests on representative parts. The
study aims to control chamfer size within tolerances by adjusting process conditions and optimizing
processing efficiency. By exploring the fundamentals of the chamfering process, this research offers
insights into breaking sharp edges on components with positional errors and shape deformations,
with a particular emphasis on aero-engine casings. The integration of theoretical modelling and
experimental validation enhances the understanding of force performance, chamfer size, and process
parameters such as feeds and cutting speed. Through the use of representative test parts made of
Inconel 718, commonly used in aero-engine manufacturing, this work contributes to advancing the
knowledge and practical applications in chamfering operations and edge finishing in the
manufacturing industry.
| № | Имя автора | Должность | Наименование организации |
|---|---|---|---|
| 1 | Tuyboyov O.V. | PhD, Associate Professor | Tashkent State Technical University, |
| 2 | Normatov .B. | Researcher, | Tashkent State Technical University, |
| 3 | Pardayev A.A. | Researcher | Tashkent State Technical University, |
| 4 | Boratov A.G. | Master student | Tashkent State Technical University, |
| 5 | Abdullayev S.T. | Master student | Tashkent State Technical University, |
| № | Название ссылки |
|---|---|
| 1 | 1. Kroeker, J. (2015). Design, Analysis & Testing of an Enhanced Radial-Axial Hybrid Compliant Deburring Tool (Doctoral dissertation, MSc thesis). 2. Ahmed, G. S., Quadri, S. S. H., & Mohiuddin, M. S. (2015). Optimization of feed and radial force in turning process by using Taguchi design approach. Materials Today: Proceedings, 2(4-5), 3277-3285. 3. Choi, S. W., Chang, S. H., Park, Y. T., Lee, G. P., & Bae, G. J. (2014). Comparative analysis of cutter acting forces and axial stresses of single and double disc cutters by linear cutting tests. Journal of Korean Tunnelling and Underground Space Association, 16(2), 181-191. |
| 2 | 4. Khelifa, M., & Khennane, A. (2014). Numerical analysis of the cutting forces in timber. Journal of Engineering Mechanics, 140(3), 523-530. 5. Sato, K., & Yamamoto, D. (2020). Contactchemosensory evolution underlying reproductive isolation in Drosophila species. Frontiers in Behavioral Neuroscience, 14, 597428. 6. Yan, Y., Jiang, C., & Yan, H. (2023). Probabilistic model of the surface residual height under longitudinaltorsional ultrasonic vibration assisted micro-milling TC4. The International Journal of Advanced Manufacturing Technology, 1-19. |
| 3 | 7. Pop, P. A. (2009, January). The Analyses of Dynamic Stability at Milling Machine Tools. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Vol. 48982, pp. 1325-1334). 8. Zhuang, K., Weng, J., Zhu, D., & Ding, H. (2018). Analytical modeling and experimental validation of cutting forces considering edge effects and size effects with round chamfered ceramic tools. Journal of manufacturing science and engineering, 140(8), 081012. 9. Kapoor, S. G., DeVor, R. E., Zhu, R., Gajjela, R., Parakkal, G., & Smithey, D. (1998). Development of mechanistic models for the prediction of machining performance: model building methodology. Machining Science and Technology, 2(2), 213-238. |
| 4 | 10. Altmeyer, J., Dos Santos, J. F., & Amancio-Filho, S. T. (2014). Effect of the friction riveting process parameters on the joint formation and performance of Ti alloy/short-fibre reinforced polyether ether ketone joints. Materials & Design, 60, 164-176. 11. Ren, H., & Altintas, Y. (2000). Mechanics of machining with chamfered tools. J. Manuf. Sci. Eng., 122(4), 650-659. 12. Crichigno, J., Bou-Harb, E., & Ghani, N. (2018). A comprehensive tutorial on science DMZ. IEEE Communications Surveys & Tutorials, 21(2), 2041-2078. 13. Gonzalez, M., Rodriguez, A., Pereira, O., Celaya, A., de Lacalle, L. L., & Esparta, M. (2023). Axialcompliant tools for adaptive chamfering of sharp-edges: Characterisation and modelling. Engineering Science and Technology, an International Journal, 41, 101407. |
| 5 | 14. Liao, L., Xi, F. J., & Liu, K. (2008). Modeling and control of automated polishing/deburring process using a dual-purpose compliant toolhead. International Journal of Machine Tools and Manufacture, 48(12-13), 1454-1463. 15. Zhuang, K., Fu, C., Weng, J., & Hu, C. (2021). Cutting edge microgeometries in metal cutting: a review. The International Journal of Advanced Manufacturing Technology, 116(7), 2045-2092. 16. Asad, M., Ijaz, H., Khan, M. A. A., Khan, M., Mabrouki, T., & Rashid, M. U. (2022). Comparative analyses and investigations of chamfered and honed-edge tool geometries on tool wear, chip morphology, residual stresses and end-burr formation. Journal of Manufacturing Processes, 80, 196-209. |