The article examines the effect of a multifunctional additive and a low-activity mineral filler on the formation of porosity and structure of a cement composite. The multifunctional additive includes several active components that contribute to improving the properties of the cement matrix, whereas a lowactivity mineral filler is used to regulate microstructure and porosity. In the course of the work, experimental studies were carried out, including the analysis of pore morphology and particle distribution using X-ray phase and differential thermal methods. Changes in the structure of the cement composite, its strength and durability were evaluated depending on the content and ratio of additives. The results showed that the combination of a multifunctional additive and a low-activity filler leads to a significant improvement in the mechanical properties and controlled porosity of the cement composite, which opens up new prospects for the development of more efficient building materials.
The article examines the effect of a multifunctional additive and a low-activity mineral filler on the formation of porosity and structure of a cement composite. The multifunctional additive includes several active components that contribute to improving the properties of the cement matrix, whereas a lowactivity mineral filler is used to regulate microstructure and porosity. In the course of the work, experimental studies were carried out, including the analysis of pore morphology and particle distribution using X-ray phase and differential thermal methods. Changes in the structure of the cement composite, its strength and durability were evaluated depending on the content and ratio of additives. The results showed that the combination of a multifunctional additive and a low-activity filler leads to a significant improvement in the mechanical properties and controlled porosity of the cement composite, which opens up new prospects for the development of more efficient building materials.
| № | Имя автора | Должность | Наименование организации |
|---|---|---|---|
| 1 | Kadirov I.A. | dotsent | Toshkent davlat transport universiteti |
| 2 | Kudratov B.S. | tayanch doktorant | Toshkent davlat transport universiteti |
| 3 | Adilxodjayev A.I. | professor | Toshkent davlat transport universiteti |
| 4 | Azimov D.. | dotsent | Toshkent davlat transport universiteti |
| № | Название ссылки |
|---|---|
| 1 | Адилходжаев, А., Шаумаров, С., & Кандахаров, С. (2022). IMPROVING THE PHYSICAL AND MECHANICAL CHARACTERISTICS OF STRUCTURAL AND HEAT-INSULATING AERATED CONCRETE. Научный журнал транспортных средств и дорог, 2(2), 131-136. |
| 2 | Адилходжаев, А. И., Махаматалиев, И., Кадиров, И., Азимов, Д. Т., & Кудратов, Б. (2023). Теоретические и методологические аспекты получения и применения минеральных порошков в качестве наполнителей для цементных систем. Недропользование и транспортные системы, 13(1), 30- 39 |
| 3 | Ishanovich, A. A., Kadirov, I. A., Sherzodovich, K. B., & Farkhadovna, T. D. (2023). ON CARBONATION CORROSION OF MODIFIED CONCRETES USING MICROWAVES. Miasto Przyszłości, 40, 639-342 |
| 4 | Adilkhodzhaev, A. I., Kadirov, I. A., & Kudratov, B. S. (2023). To the Question of Optimization of the Process of Mechanical Activation of Metallurgical Slag |
| 5 | Тургунбаев, У., Кудратов, Б., & Тухтабоев, Э. (2022). DISPERSED REINFORCEMENT OF NONAUTOCLAVED AERATED CONCRETE WITH ASBESTOS AND FIBERGLASS: DISPERSED REINFORCEMENT OF NON-AUTOCLAVED AERATED CONCRETE WITH ASBESTOS AND FIBERGLASS. Ресурсосберегающие технологии на транспорте, 2022(2022), 384-388 |
| 6 | Адилходжаев, А. И., Кадиров, И. А., Абдуллаев, У. Х., & Кудратов, Б. Ш. (2022). О влияние комплексных-модифициров с наполнителями различной природы на свойств тяжелого бетона |
| 7 | Adilkhojaev, A. I., & Kadirov, I. A. (2021). On the Mechanoactivation of Metallurgical Waste. European Journal of Research Development and Sustainability, 2(5), 60-67. |
| 8 | Adilxodjaev, A. I., & Kadirov, I. A. (2023). Expanded Clay Concrete Made on the Basis of Metallurgical Waste |
| 9 | Adilkhodzhaev, A. I., Kadirov, I. A., Umarov, K. S., & Azimov, D. T. (2023). To The Question of the Choice of Technological Equipment For Continuous Shell less Forming Reinforced Concrete Products on a Long Stand. EUROPEAN MULTIDISCIPLINARY JOURNAL OF MODERN SCIENCE (EMJMS), 1 |
| 10 | Ishanovich, A. A., & Abdullaevich, K. I. (2021). Technical And Economic Comparison Of The Efficiency Of Production Of Empty Plates Of Overlapping Of Underworking Forming When Reinforced With Wire And Ropes. European Scholar Journal, 2(11), 66-69 |
| 11 | Adilkhodzhaev, A. I., Kadirov, I. A., Umarov, K. S., & Azimov, D. T. (2021, October). Features of continuous units forming of reinforced concrete products. In " ONLINECONFERENCES" PLATFORM (pp. 1-4) |
| 12 | Adilkhodzhaev, A. I., Umarov, K. S., Kadirov, I. A., & Azimov, D. T. (2021, September). Modern ResourceSaving Technologies for Production of Pre-Concrete Concrete Structures. In " ONLINE-CONFERENCES" PLATFORM (pp. 86-89) |
| 13 | Nazarova, S. B., Adilxodjaev, A. I., & Kadirov, I. A. (2021, June). LIGHTWEIGHT CONCRETES BASED ON POROUS AGGREGATES. In E-Conference Globe (pp. 134-136) |
| 14 | Adilkhodzhaev, A., Makhamataliev, I., Umarov, K., & Shaumarov, S. (2020). On the method of ensuring the quality of concrete mix and concrete on the lines of formless molding of reinforced concrete products. Solid State Technology, 63(6), 414-420 |
| 15 | Махаматалиев, И. М., Цой, В. М., & Кадыров, И. А. (2019). Современные методы исследования поровой структуры строительных материалов. Учебнометодическое пособие. Адылходжаев АИ. |
| 16 | Adilkhodjayev, A. I., & Kadirov, I. A. (2018). SOME ASPECTS OF STUDYING THE STRUCTURE OF CONSTRUCTION MATERIALS BY THE METHOD OF MERCURY PUROMETRY. Journal of Tashkent Institute of Railway Engineers, 14(2), 3-7 |
| 17 | Adilxodjayev, A. I., Kadirov, I. A., & Abdullayev, U. X. ABOUT THE PROPERTIES OF A MODIFIED CEMENT BINDER BASED ON A BINARY MICROWAVE. THE SCIENTIFIC JOURNAL OF VEHICLES AND ROADS, 112 |
| 18 | KadyrovIlkhom, A., & Said, S. UmarovKadir. Some Peculiarities of the Process of Preparing the Zeolites Containing Breeds in a Ball Mill. International Journal of Recent Technology and Engineering (IJRTE). Issue-4, 7695- 7698 |
| 19 | КАДЫРОВ, И. ЦЕОЛИТСОДЕРЖАЩИЕ ПОРОДЫ УЗБЕКИСТАНА И ПЕРСПЕКТИВЫ ПРИМЕНЕНИЯ В ЦЕМЕНТНЫХ КОМПОЗИТАХ. Р е ц е н з е н т ы: генеральный директор РУП «Гомельавтодор» СН Лазбекин; д-р техн. наук, профессор АК Головнич (БелГУТ), 42 |
| 20 | Адилходжаев, А. И., Игамбердиев, Б. Г., & Сон, Д. О. (2024). К ВОПРОСУ ИСПОЛЬЗОВАНИЯ НЕКОНДИЦИОННОГО СЫРЬЯ ПРИ ПРОИЗВОДСТВЕ КЕРАМИЧЕСКИХ КИРПИЧЕЙ. Universum: технические науки, 2(7 (124)), 18-22 |
| 21 | Адилходжаев, А. И., Кадиров, И. А., Азимов, Д. Т., & Кудратов, Б. Ш. (2023). НЕКОТОРЫЕ АСПЕКТЫ ТЕХНОЛОГИИ НЕПРЕРЫВНОГО БЕЗОПАЛУБОЧНОГО ФОРМОВАНИЯ ЖЕЛЕЗОБЕТОННЫХ ИЗДЕЛИЙ. In Актуальные проблемы современной науки, техники и образования (pp. 17-17) |
| 22 | Adilkhodzhaev, A. I., Kadirov, I. A., Azimov, D. T., & Kudratov, B. S. (2024, March). Thermodynamic analysis of mineral powder grinding processes. In AIP Conference Proceedings (Vol. 3045, No. 1). AIP Publishing. |