Hazzan, K. E., Pacella, M., & See, T. L. (2021). Laser Processing of Hard and Ultra-Hard Materials for Micro-Machining and Surface Engineering Applications. Micromachines, 12(8), 895. https://doi. org/10.3390/mi12080895

Hou, N., Ding, N., Qu, S., Guo, W., Liu, L., Xu, N., Tian, L., Xu, H., Chen, X., Zaïri, F., & Lawrence, W. C.-M. (2022). Failure modes, mechanisms and causes of shafts in mechanical equipment. Engineering Failure Analysis, 136, 106216. https://doi.org/10.1016/j.engfailanal.2022.106216

Hu, Y., Watson, M., Maiorino, M., Zhou, L., Wang, W.J., Ding, H. H., Lewis, R., Meli, E., Rindi, A., Liu, Q. Y., & Guo, J. (2021). Experimental study on wear properties of wheel and rail materials with different hardness values. Wear, 477, 203831. https://doi.org/10.1016/j.wear.2021.203831

Küçük, Y., Altaş, E., & Topcu, M. E. (2023). A comparative analysis of the effect of laser surface treatment on the dry sliding wear behavior of ductile cast irons with different microstructures. Optik, 274, 170540. https://doi.org/10.1016/j.ijleo.2023.170540

Lv, Y., Cui, B., & Sun, Z. (2024). Investigation on wear behavior for SUS420 steel gear based on discrete laser surface melting. Optics & Laser Technology, 170, 110251. https://doi.org/10.1016/j.optlastec.2023.110251

Moradi, M., Karami, M. M., & Shamsborhan, M. (2020). How the laser beam energy distribution effect on laser surface transformation hardening process; Diode and Nd:YAG lasers. Optik, 204, 163991. https://doi.org/10.1016/j.ijleo.2019.163991

Moradi, M., Sharif, S., Jamshidi N. S., & Karami, M. M. (2020). Laser surface hardening of AISI 420 steel: Parametric evaluation, statistical modeling and optimization. Optik, 224, 165666. https:// doi.org/10.1016/j.ijleo.2020.165666

Muthukumaran, G., & Dinesh, B. P. (2021). Laser transformation hardening of various steel grades using different laser types. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43(2), 103. https://doi.org/10.1007/s40430-021-02854-4

Podgornik, B. (2022). Adhesive Wear Failures. Journal of Failure Analysis and Prevention, 22(1), 113-138. https://doi.org/10.1007/s11668-021-01322-4

Politis, D. J., Politis, N. J., & Lin, J. (2021). Review of recent developments in manufacturing lightweight multi-metal gears. Production Engineering, 15(2), 235-262. https://doi.org/10.1007/s11740-020-01011-5

Rohrmoser, A., Bode, C., Schleich, B., Hagenah, H., Wartzack, S., & Merklein, M. (2021). Influence of Metal Gear Tooth Geometry on Load and Wear within Metal-Polymer Gear Pairs. Applied Sciences, 12(1), 270. https://doi.org/10.3390/app12010270

Ruiz-Ponce, G., Arjona, M.A., Hernandez, C., & Escarela-Perez, R. (2023). A Review of Magnetic Gear Technologies Used in Mechanical Power Transmission. Energies, 16(4), 1721. https://doi. org/10.3390/en16041721

Singh, A. K., Kumar, S., Agrawal, B. N., & Nain, P. K. S. (2023). Design and Analysis of Spur Gear, Helical Gear, and Bevel Gear by Using ANSYS. In R. M. Singari, P. K. Jain, & H. Kumar (Eds.). Advances in Manufacturing Technology and Management, Lecture Notes in Mechanical Engineering (pp. 641-650). Singapore: Springer Nature Singapore. https://doi.org/10.1007/978-981-16-9523- 0_70

Xiang, D., Liu, Y., Yu, T., Wang, D., Leng, X., Wang, K., Liu, L., Pan, J., Yao, S., & Chen, Z. (2024). Review on wear resistance of laser cladding high-entropy alloy coatings. Journal of Materials Research and Technology, 28, 911-934. https://doi.org/10.1016/j.jmrt.2023.11.138

Zhai, W., Bai, L., Zhou, R., Fan, X., Kang, G., Liu, Y., & Zhou, K. (2021). Recent Progress on WearResistant Materials: Designs, Properties, and Applications. Advanced Science, 8(11), 2003739. https:// doi.org/10.1002/advs.202003739

Zhang, N., Guo, S., He, G., Jiang, B., Zhou, L., Chen, Y., & Liu, Y. (2022). Failure analysis of the carburized 20MnCr5 gear in fatigue working condition. International Journal of Fatigue, 161, 106938. https://doi.org/10.1016/j.ijfatigue.2022.106938

Zhang, T., Zhang, C., Zhang, L., & Li, J. (2021). Evolution of thermal stress in millisecond laser manufacturing. Optics Communications, 482, 126592. https://doi.org/10.1016/j.optcom.2020.126592

Anusha, E., Kumar, A., & Shariff, S. M. (2020). A novel method of laser surface hardening treatment inducing different thermal processing condition for Thin-sectioned 100Cr6 steel. Optics & Laser Technology, 125, 106061. https://doi.org/10.1016/j.optlastec.2020.106061

Arulvel, S., Desilva, W. R. D., Jain, A., Kandasamy, J., & Singhal, M. (2023). Laser processing techniques for surface property enhancement: Focus on material advancement. Surfaces and Interfaces, 42, 103293. https://doi.org/10.1016/j.surfin.2023.103293

Beauson, J., Laurent, A., Rudolph, D.P., & Pagh J. J. (2022). The complex end-of-life of wind turbine blades: A review of the European context. Renewable and Sustainable Energy Reviews, 155, 111847. https://doi.org/10.1016/j.rser.2021.111847

Daroonparvar, M., Bakhsheshi-Rad, H. R., Saberi, A., Razzaghi, M., Kasar, A. K., Ramakrishna, S., Menezes, P. L., Misra, M., Ismail, A. F., Sharif, S., & Berto, F. (2022). Surface modification of magnesium alloys using thermal and solid-state cold spray processes: Challenges and latest progresses. Journal of Magnesium and Alloys, 10(8), 2025-2061. https://doi.org/10.1016/j.jma.2022.07.012