The article presents the results of studying the parameters of optical
matching of optical fibers with a micro lens at the end and semiconductor lasers. A
technique is described for obtaining high efficiency of radiation from a rectangular end
of semiconductor lasers into an optical fiber with a circular cross-section, for which it is
necessary to direct a scattering laser beam with an elliptical cross-section to a circular
cross-section of the core at the end of the fiber. A technique for measuring the efficiency
of matching an optical fiber with a semiconductor laser is described. The dependence of
the tuning efficiency on the semi-angle of the semiconductor laser beam is shown. The
experimentally obtained dependences of the radiation power from the end face of the
laser and the end face of a segment of single-mode optical fibers on the pump current
are presented graphically. Special measures were taken to filter cladding modes in the
segment of single-mode optical fibers. A device has been developed that provides highprecision positioning of the optical fiber and the emitting area of the semiconductor laser
relative to each other along three linear coordinates and two angular ones. The principle
of operation of the device, which provides mutual accurate positioning of single-mode
optical fibers with a micro lens at the end and semiconductor lasers, is described in
detail.
The article presents the results of studying the parameters of optical
matching of optical fibers with a micro lens at the end and semiconductor lasers. A
technique is described for obtaining high efficiency of radiation from a rectangular end
of semiconductor lasers into an optical fiber with a circular cross-section, for which it is
necessary to direct a scattering laser beam with an elliptical cross-section to a circular
cross-section of the core at the end of the fiber. A technique for measuring the efficiency
of matching an optical fiber with a semiconductor laser is described. The dependence of
the tuning efficiency on the semi-angle of the semiconductor laser beam is shown. The
experimentally obtained dependences of the radiation power from the end face of the
laser and the end face of a segment of single-mode optical fibers on the pump current
are presented graphically. Special measures were taken to filter cladding modes in the
segment of single-mode optical fibers. A device has been developed that provides highprecision positioning of the optical fiber and the emitting area of the semiconductor laser
relative to each other along three linear coordinates and two angular ones. The principle
of operation of the device, which provides mutual accurate positioning of single-mode
optical fibers with a micro lens at the end and semiconductor lasers, is described in
detail.
| № | Ҳавола номи |
|---|---|
| 1 | A.L. Dmitriev. Optical systems for information transmission. “St. Petersburg SUITMO”. 2007. 96 |
| 2 | E.M. Dianov. On the threshold of the Tara-era. “Quantum Electronics”. 2000. 659 |
| 3 | S.A. Dmitriev, N.N. Slepov. “Fiber optic technology: history, achievements and perspectives”. 2000. 124. |
| 4 | S.A. Dmitriev, N.N. Slepov. “Fiber optic technology: history, achievements and perspectives”. 2000. 124. |
| 5 | H.Ch. Shiraz. Experimental investigation on coupling efficiency between semiconductor laser diodes and single-mode fibers by an etching technique. “Optical and Quantum Electronics”. 1988. 493 |
| 6 | V.V. Kotlyar, A.A. Kovalev. “Family of hypergeometric laser beams”. 2008. 262 |
| 7 | A.L. Dmitriev. Semiconductor light sources for information transmission and processing systems. “Textbook. Allowance”. 2006. 56 |
| 8 | H. Ch. Shiras, T. Assano. “Micro lens for coupling a semiconductor laser to a single-mode fiber”. 1986. 537 |
| 9 | W.H. Cheng, C.S. Wang, C.J. Hwang. Highly efficient power coupling between “Galas lasers and tapered hemispherical end multimode fibers”. 1982. 3409. |
| 10 | K. Kawano, O. Mitomi. “Coupling characteristics of laser diode to multimode fiber using separate lens methods”. 1986. 136. |
| 11 | V.V. Kotlyar, A.A. Kovalev, S.S. Stafeev. Sharp focus area of radially-polarized Gaussian beam propagation through an ax icon. “Progress in electromagnetics research”. -2008. 35 |
| 12 | J. Sakai, J. Jamada, J. Murakami. “Characteristics of a hemispherical micro lens for coupling between a semiconductor laser and single-mode fiber”. 1980. 1067 |
| 13 | C.A. Bracket. “On the efficiency of coupling light from stripe geometry Galas lasers into multimode optical fibers”. 1984. 2636 |
| 14 | C.A. Bracket. “On the efficiency of coupling light from stripe geometry Galas lasers into multimode optical fibers”. 1984. 2636 |
| 15 | K. Mathyssek, J. Wittman, R. Reil. “Fabrication and Investigation of drawn fiber tapers with spherical micro lenses”. 1985. 142 |