In this research paper, experimental studies on the fabrication of
Aluminum based metal matrix composites composed are presented. The Aluminum
based metal matrix composite was developed with varying percentage of WS2.
Physical and mechanical properties were measured to assess the influence of
addition of WS2 on density and micro hardness of composite
In this research paper, experimental studies on the fabrication of
Aluminum based metal matrix composites composed are presented. The Aluminum
based metal matrix composite was developed with varying percentage of WS2.
Physical and mechanical properties were measured to assess the influence of
addition of WS2 on density and micro hardness of composite
№ | Имя автора | Должность | Наименование организации |
---|---|---|---|
1 | Wani M.F. | teacher | Tribology laboratory mechanical engineering department national instituteof technology |
2 | Ziyamukhamedova U.. | teacher | Tashkent State Transport University, Uzbekistan |
№ | Название ссылки |
---|---|
1 | K.G. Veeresh, B.C. Rao, S.P. Selvaraj. Mechanical and tribological behavior of particulate reinforced aluminum metal matrix composites a review. “Miner. mater. character”. 2011. 59 |
2 | D.K Koli, G. Agnihotri, R. Purohit. “A review on properties, behavior and processing methods for Al-nano Al2O3 composites. Procedia Mater”. 2014. 567 |
3 | M.Kathiresan, T. Sornakumar. “Friction and wear studies of die cast aluminum alloy-aluminum oxide-reinforced composites”. 2010. 361 |
4 | A.T. Alpas, J. Zhang. “Effect of microstructure (particle size and volume fraction) and counter face material on the sliding wear resistance of particulate-reinforced aluminum matrix composites”. 1994. 969 |
5 | H. Kala, K.K. Mer, S.A. Kuma. “A review on mechanical and tribological behaviors of stir cast aluminum matrix composites”. 2014. 1951 |
6 | P. Ravindran, K. Maniseka, P. Rathika, P. Narayanasamy. Tribological properties of powder metallurgy – processed aluminum self-lubricating hybrid composites with SiC additions”. 2013. 561 |
7 | A.N. Fedyaeva, S.Y. Matyushkov, G.V. Rogovtsev, A.N. Tarasov. Traction electric drive control at the limit of wheel-rail adhesion and suppression of frictional autooscillations. “Publishing house of VNU”. 2011. 31 |
8 | D.K. Minov. “Improvement of traction properties of electric locomotives and diesel locomotives with electric transmission”. 1965. 267 |
9 | E.M. Frenkel. To the question of wheel-rail adhesion. “Trans Holder Publishing”. 1953 |
10 | V.I. Naumov. Influence of contact strength of metal on the force of adhesion of a wheel with rails. Influence of the contact strength of metal on the force of adhesion of the wheel wit rail. “Proceedings of the All-Union Scientific Research. Institute of Railroad Transport”. 1963.255 |
11 | V.E. Rosenfeld, I.P. Isaev, N.N. Sidorov. Electric traction. “Trans Holder Publishing”. 1962 |
12 | M.R. Barsky, I.N. Serdinova. Experimental study of the processes of skidding and skidding of electric locomotives. "Problems of improving the efficiency of transport". “Publishing house of the USSR academy of sciences”. 1953 |
13 | D.S. Prasad, C. Shoba. N. Ramanaiah. “Investigations on mechanical properties of aluminum hybrid composites”. 2014. 79 |
14 | M.B. Karamis, A.A. Cerit, B. Selcuk, F. Nair. “The effects of different ceramics size and volume fraction on wear behavior of Al matrix composites”. 2012. 73 |
15 | M. Ratoi, V.B. Niste, J. Walker, J. Zekonyte. “Mechanism of action of WS2 lubricant nan additives in high-pressure contacts”. 2013. 81 |
16 | L. Rapoport, N. Fleischer, R. Tenne. “Applications of WS2(MoS2) inorganic nanotubes and fullerene-like nanoparticles for solid lubrication and for structural nanocomposites”. 2005. 1782 |
17 | E. Selvi, Y. Ma, R. Aksoy, A. Ertas, A. White. “High pressure X-ray diffraction study of tungsten disulfide”. “Journal of physics and chemistry of solids”. 2006 2183 |
18 | O.D. Greenwood, S.C. Moulzolf, P.J. Blau, R.J. Lad. “The influence of microstructure on tribological properties of wo thin films” journal wear”. 1999. 84 |