The article describes the simulation of the temperature field in a wide range of structural and operational parameters of the drying process. A qualitatively new representation of the temperature field profile in the chamber is revealed. As a result of the experiments, criteria were found for the unevenness of the temperature profiles on the pallets of the dispersion of the temperature of the material and the slope of the approximating line at fixed values of the average temperature of the substance. In the course of the work, an interrelation between the criteria of unevenness was revealed, which is clearly manifested when comparing optimization options according to various criteria. The solution to the optimization problem gives small deviations. The developed model allows you to organize process control taking into account strategic tasks: maximum performance or minimum power consumption. An engineering technique is proposed for selecting individual operational and design parameters of the installation based on the proposed nomograms.
Maqolada quritish jarayonining konstruksiya va rejimli parametrlarining harorat maydonini variantli keng diapozonlari modeli yaratilganligi keltirilgan. Kamerada harorat maydoni profillarining yangi sifatli tasviri aniqlangan. Har bir tagliklardagi substanstiyaning fiksastiyalangan qiymatlarning o‘rtacha haroratida to‘g‘ri aproksimastiyalanadigan burchak qiyaligi va materialning harorat dispersiyasi harorat profilini notekis mezonlari olib borilgan tadqiqotlar natijasida aniqlangan. Ishni olib borish jarayonida turli mezonlar bo‘yicha variantlar optimizastiyasi taqqoslanganda ko‘rinib turgan notekisliklar mezoni o‘rtasidagi bog‘liqlik aniqlandi. Optimallashtirish vazifaning yechimi kichik aksariyatni olib keladi. Ishlab chiqilgan model strategik vazifalarni inobatga olgan jarayonni boshqarishni tashkil etish imkonini beradi.
The article describes the simulation of the temperature field in a wide range of structural and operational parameters of the drying process. A qualitatively new representation of the temperature field profile in the chamber is revealed. As a result of the experiments, criteria were found for the unevenness of the temperature profiles on the pallets of the dispersion of the temperature of the material and the slope of the approximating line at fixed values of the average temperature of the substance. In the course of the work, an interrelation between the criteria of unevenness was revealed, which is clearly manifested when comparing optimization options according to various criteria. The solution to the optimization problem gives small deviations. The developed model allows you to organize process control taking into account strategic tasks: maximum performance or minimum power consumption. An engineering technique is proposed for selecting individual operational and design parameters of the installation based on the proposed nomograms.
В статье описано осуществление моделирования температурного поля в широком диапазоне варьирования конструктивных и режимных параметров процесса сушки. Выявлено качественно новое представление профиля температурного поля в камере. В результате проведённых экспериментов были найдены критерии неравномерности профилей температуры по поддонам дисперсии температуры материала и угла наклона аппроксимирующей прямой при фиксированных значениях средней температуры субстанции. При выполнении работы была выявлена взаимосвязь между критериями неравномерности, которая наглядно проявляется при сравнении вариантов оптимизации по различным критериям. Решение оптимизационной задачи обеспечивает незначительные отклонения. Разработанная модель позволяет организовать управление процессом с учётом стратегических задач: максимальная производительность или минимальная энергоёмкость. Предложена инженерная методика выбора отдельных режимных и конструктивных параметров установки на основе предложенных номограмм.
| № | Muallifning F.I.Sh. | Lavozimi | Tashkilot nomi |
|---|---|---|---|
| 1 | Sultanova S.A. | доцент | TDTU |
| 2 | Safarov J.E. | dotsent | TDTU |
| № | Havola nomi |
|---|---|
| 1 | The study of freezing in the production of semi-finished products from potatoes / A.Yu. Prosekov, R.Z. Grigoryeva, S.Yu. Yuryev, V.A. Jdanov // Achievements of science and technology of the agro-industrial complex, - 2006. No. 6. – 47 p. 2. Prosekov A.Yu. Theory and practice of prion protein analysis in food products / A.Yu. Prosekov // Foods and Raw Materials, 2014. №. 2. P. 106–120. 3. Short I.A. Application of the method of two temperature-time intervals to determine the thermophysical characteristics of food products and materials / I.A. Short, E.V. Short // University News. Food technology, 2008. - No. 2–3. P. 109–111. 4. Short I.A. Application of the method of two temperature-time intervals to determine the thermophysical characteristics of solid, liquid and bulk materials / I.A. Short // Technique and technology of food production, 2009. No. 2. P. 37–41. 5. Ostroumov, L.A. The method of two temperature-time intervals for determining the thermophysical characteristics of solid, liquid and bulk food products and materials / L.A. Ostroumov, I.A. Short, M.I. Ibragimov // Storage and processing of agricultural raw materials, 2007. No. 1. P. 69–71. 6. Vasiliev A.N. Electrotechnology and control during intensification of grain drying by active ventilation / A.N. Vasiliev. - Rostov-on-Don: TerraPrint, 2008 .-- 240 p. 7. Jangam S.V. Drying of Foods, Vegetables and Fruits. Volume 1 / S.V. Jangam, C.L. Law, A.S. Mujumdar. – Singapore: National University of Singapore, 2010.– 232 р. 8. Kaplun A.B., Meshalkin A.B. The equation of state of dense gases of one-component substances. / Technical Physics. Reports of the Academy of Sciences. Volume 392.No.1.2003.P.1-5. 9. Larina E.L. Efficiency analysis of energy-technological heat-mass transfer processes in moist air in the textile industry: Abstract. dis. ... cand. tech. Sciences: 05.14.04 / E.L. Larina. - M., 2003 .- 15 p. 10. Chagin O.V., Kokina N.R., Pastin V.V. Food Drying Equipment. Ivanovo, Ivan.chem. - technol. un-t, 2007. -138 p. 11. Votinov M.V. Improving the efficiency of heat treatment of fish by automatically controlling the processes of its heating and dehydration. The dissertation for the degree of candidate of science in technical sciences.- Murmansk , 2015.- 250 p. 12. Natareev OS Modeling and calculation of the drying process of wet materials in a chamber dryer. The dissertation for the degree of candidate of technical sciences. Ivanovo, 2016 .-- 147 p. 13. Ayse B., Filiz K. Experimental Investigation of Drying Behavior of Rosehip in a Cyclone-Type Dryer. // International Scholarly and Scientific Research & Innovation 7(6), 2013. P.1316-1320. 14. Cuervo-Andrade S.P. and Hensel O. Stepwise drying of medicinal plants as alternative to reduce time and energy processing. IOP Conference Series: Materials Science and Engineering, Volume 138, Number 1. 2016 IOP Conf. Ser.:Mater. Sci. Eng. Р. 138. 15. Kudra T. Advanced drying technologies / T. Kudra, A.S. Mujumdar. – New York, Basel: Marcel Dekker, Inc, 2002. - 472 p. 16. Gatapov N.Ts. The complex methodology of experimental studies and thermophysical measurements in drying processes with significant temperature kinetics [Text] / N.Ts. Gatapov, V.I. Konovalov // Bulletin of TSTU, 2005. T. 11, No. 1A. - P. 133 - 150. 17. Kyurdyumov V.I., Pavlushin A.A., Karpenko G.V., Sutyagin S.A. Grain heat treatment in contact type plants. Monograph / Ulyanovsk UTSAA named after P.A. Stolyshin, 2013. -290 s. 18. Degtyarev A.A. Kinetics and mathematical modeling of the drying process of thermolabile materials in a vibro-aero-boiling layer. dis. Cand. those. Sciences: 05.17.08 / A. D. Plat Degtyarev A.A. - Tambov, 2010 .-- 262 p. 19. Akulich P.V. Calculations of drying and heat exchange plants / P.V. Akulich. - Minsk: Belarus. Navuka, 2010 .-- 443 p. 20. Sazhin B.S., Sazhin V.B. Scientific foundations of thermal moisture treatment of dispersed and roll materials. - M .: Chemistry, 2012, - 776 P. 21. Aleksanyan I.Yu., Maksimenko Yu.A., Guba O.E., Feklunova Yu.S. Spray dryer // Technologies of food and processing industry AIC - healthy food products. -Voronezh, 2015. No. 2 (6). S. 55-59. 22. Safarov J.E., Sultanova Sh.A. The influence of the structure of coolant flows on the phase temperature profile in a mobile drying unit. Problems of energy and resource conservation, 2017. No. 3-4. P. 123-127. 23. Sultanova Sh.A., Safarov Zh.E., Azizov U.A., Tulaganov A.A. The use of a water heating convective drying plant for the dehydration of medicinal plants. - Tashkent, // Pharmaceutical journal, 2018. No. 1. P.19-22. 24. Sultanova Sh.A. The study of the temperature field profiles of the convective drying of plant materials. Storage and processing of agricultural raw materials. - Moscow, 2017. No. 8, 47-50 p. 25. Sultanova Sh.A. Improvement of water heater convective installation for drying drugs. Diss. Tashkent, 2018. -120 p. |