Objective: In studying the technological process of separation of soybean seeds from pods and stems, it is important to know the moisture and hardness of pods and stems. Therefore, determine the moisture content and hardness of shade pods and stems.
Methods: In experiments, the moisture content of soybean stem with a length of 800-1100 mm was measured on an EV-2K electronic humidity meter every 100 mm interval. The dampness of the shade was carried out using an EV-2K power meter that measures humidity. Before changing the scales, their display is checked. The sharpened part of the needle in the direction of the stem fibers is completely immersed in it. To make the result more accurate, the measurement is repeated several times and averaged. In the experiments, 10 stems were taken from the beginning, middle and end of the field, and the height of the stems was 80-120 cm. The moisture content of each 100 mm piece was determined from the root collar to the tip of soybean stems.
Results. The results is shown that the density of legume soybean stems averaged 85.6 kg/m3 when maximum value was 92.3 kg/m3 and the minimum value was 81.5 kg/m3.
Conclusion. The result of determining the density of legume soybean stems can be used to theoretically substantiate the performance of the device and to establish other laws of the technological process. Based on the physical and mechanical properties of leguminous stems, their transmission is provided by a continuous descent from the sloping part of the tray to the vertical part, when the angle of inclination of its sloping part relative to the horizontal plane is greater than 33-35°.
| № | Muallifning F.I.Sh. | Lavozimi | Tashkilot nomi |
|---|---|---|---|
| 1 | Tukhtabayev M.A. | dotsent | Namangan Engineering-Construction Institute |
| 2 | Pardayev O.R. | katta o'qituvchi | JizPI |
| № | Havola nomi |
|---|---|
| 1 | Rosaboev A., Egamnazarov G., Koychiyev O., Pardayev O. Seed separator of agricultural crops // Science, education and modernized energy and resource-saving technologies for the development of economic sectors, Technical means: problems, solutions, prospects: Materials of the Republican scientific and technical conference. Jizzakh, 2016. pp.144-146. |
| 2 | Rosaboev A., Pardayev O. Improving the device for separating the seeds of agricultural crops // Agro Ilm. Tashkent, 2017. № 5. p. 97. |
| 3 | Худаяров Б. М., Ражабов А. Х., Тухтабаев М. А. Скорость потока воздуха в цилиндрической трубе эжектора расселителя трихограммы //Техническое обеспечение сельского хозяйства. – 2019. – №. 1. – С. 125-132. |
| 4 | Ражабов А. Х., Тухтабаев М. А. Сопротивление в цилиндрической трубе эжектора расселителя трихограммы //Инновацион технологиялар. – 2020. – №. Спецвыпуск. – С. 50-54. |
| 5 | Tolibaev A. et al. Desert wheel tractor and agricultural machines aggregated to it. IJARSET. India, Vol. 6, Issue 9. 2019. |
| 6 | Pardayev O.R. The results of the development of a device for separating the seeds from the stems and stems // Current issues of modern research, innovation, techniques and technologies and development trends: Republican Scientific and Technical Conference. Jizzakh, 2018, pp. 86-88. |
| 7 | Rosaboev A., Pardayev O. The results of the development of a device for separating seeds from cobs and pods // Prospects for the development of quality of education and research in higher education: Proceedings of the Republican scientific-practical conference. Namangan, 2020, pp. 190-192. |
| 8 | Mamadjanov S.I., Tukhtabaev M.A., Obidov R., Umirzaqov Z.A. Perspective Technology to Improve Arid Pastures// International Journal of Recent Technology and Engineering. India, Vol. 9, Issue-1, pp. 802-811, 2020. DOI:10.35940/ ijrte.A1496.059120. |
| 9 | Muminov S.M. Substantiation of the operating mode and parameters of the alfalfa seed separator. Dis. ... tex. fan. candidate. Yangiyo'l, 2005. 138 p |
| 10 | Nikonov M.V. Improvement of the technological process of pretreatment of a heap of alfalfa seeds: Author's abstract. dis. ... Candidate of Technical Sciences. Voronezh, 1989. 24 p. |
| 11 | Gorbachev I.V. Investigation of threshing and separation by a threshing device with an active beater: Author's abstract. dis. ... Candidate of Technical Sciences. Moscow, 1976. 16 p. |
| 12 | Rosaboev A., Pardayev O. Prospects for the development of legumes // Prospects for the cultivation of cereals, non-traditional and oilseeds and fodder crops on the basis of innovative technologies in the Republic of Uzbekistan: Proceedings of the Republican scientific-practical conference. Andijan, 2020, pp. 133-136. |
| 13 | O'z.R. Patent № IAP 06249. Device for separating seeds of agricultural crops / Rosaboev AT, Yuldashev OK, Toderich K., Khaitov BB, Imamkulov UB, Pardayev OR // Official Gazette, 2020, № 7. pp. 30-31. |
| 14 | Kuznetsov N.I. Scientific basis for improving the technological reliability of post-harvest seed treatment systems: Author's abstract. dis. ... Candidate of Technical Sciences. Moscow, 1980. 18 p. |
| 15 | Manuwa S.I. Properties of soybean for best postharvest options. Soybean Physiology and Biochemistry, 2011. vol.14, №3. pp. 26-43. |
| 16 | Singh H.J., D.Dipankar, P. K. Sahoo. Physical properties of soybean cultivated in NEH region of India// TRANSACTIONS of the ASAE. USA, 2014. vol.16, №3. pp. 55-59. |
| 17 | Chukwu O. and Orhevba B.A. Determination of selected engineering properties of soybean (glycine max) related to design of processing machine. Journal Agricultural Food Technology, 2011.1(6), pp.68-72. |
| 18 | Aviara N.A., Ogunjimi L.A., Aregbesola O.A. Some engineering properties of locust bean seed. Journal of Food Engineering, 2002. vol. 55: pp. 95-99. |
| 19 | GOST 9669-61. Soybean seeds. Varietal and sowing qualities. Moscow: Publishing house of standards, 1973. pp. 105-107. |
| 20 | Nasritdinov, A., Normirzaev, A., & Nuriddinov, A. (2015). Development of aggregates for main and pre-sowing soil cultivation for sowing catch crops. Scientific and technical journal FerPI, (3), 53. |