The article presents the results of the development and research of complex modified concretes of a new generation intended for use in heat-free and low-heat technologies based on local raw materials. Approaches to the modification of concrete mixtures in order to increase their thermal stability and accelerate the strength gain at low temperatures are considered. The analysis of the effectiveness of the use of various additives, as well as the effect of the composition of concretes on their physical, mechanical and operational characteristics is carried out. Special attention is paid to the use of local mineral components to improve the environmental and economic efficiency of construction.
The article presents the results of the development and research of complex modified concretes of a new generation intended for use in heat-free and low-heat technologies based on local raw materials. Approaches to the modification of concrete mixtures in order to increase their thermal stability and accelerate the strength gain at low temperatures are considered. The analysis of the effectiveness of the use of various additives, as well as the effect of the composition of concretes on their physical, mechanical and operational characteristics is carried out. Special attention is paid to the use of local mineral components to improve the environmental and economic efficiency of construction.
| № | Muallifning F.I.Sh. | Lavozimi | Tashkilot nomi |
|---|---|---|---|
| 1 | Kadirov I.A. | dotsent | Toshkent davlat transport universiteti |
| 2 | Azimov D.T. | dotsent | Toshkent davlat transport universiteti |
| 3 | Kudratov B.S. | tayanch doktorant | Toshkent davlat transport universiteti |
| 4 | Adilxodjayev A.I. | professor | Toshkent davlat transport universiteti |
| № | Havola nomi |
|---|---|
| 1 | Adilkhodzhaev, A. I., Kadirov, I. A., Azimov, D. T., & Kudratov, B. S. (2024, March). Thermodynamic analysis of mineral powder grinding processes. In AIP Conference Proceedings (Vol. 3045, No. 1). AIP Publishing |
| 2 | Адилходжаев, А. И., Махаматалиев, И., Кадиров, И., Азимов, Д. Т., & Кудратов, Б. (2023). Теоретические и методологические аспекты получения и применения минеральных порошков в качестве наполнителей для цементных систем. Недропользование и транспортные системы, 13(1), 30- 39. |
| 3 | Ishanovich, A. A., Kadirov, I. A., Sherzodovich, K. B., & Farkhadovna, T. D. (2023). ON CARBONATION CORROSION OF MODIFIED CONCRETES USING MICROWAVES. Miasto Przyszłości, 40, 639-342 |
| 4 | Adilkhodzhaev, A. I., Kadirov, I. A., & Kudratov, B. S. (2023). To the Question of Optimization of the Process of Mechanical Activation of Metallurgical Slag |
| 5 | Тургунбаев, У., Кудратов, Б., & Тухтабоев, Э. (2022). DISPERSED REINFORCEMENT OF NONAUTOCLAVED AERATED CONCRETE WITH ASBESTOS AND FIBERGLASS: DISPERSED REINFORCEMENT OF NON-AUTOCLAVED AERATED CONCRETE WITH ASBESTOS AND FIBERGLASS. Ресурсосберегающие технологии на транспорте, 2022(2022), 384-388. |
| 6 | Адилходжаев, А. И., Кадиров, И. А., Абдуллаев, У. Х., & Кудратов, Б. Ш. (2022). О влияние комплексных-модифициров с наполнителями различной природы на свойств тяжелого бетона |
| 7 | Adilkhojaev, A. I., & Kadirov, I. A. (2021). On the Mechanoactivation of Metallurgical Waste. European Journal of Research Development and Sustainability, 2(5), 60-67. |
| 8 | Adilxodjaev, A. I., & Kadirov, I. A. (2023). Expanded Clay Concrete Made on the Basis of Metallurgical Waste |
| 9 | Adilkhodzhaev, A. I., Kadirov, I. A., Umarov, K. S., & Azimov, D. T. (2023). To The Question of the Choice of Technological Equipment For Continuous Shell less Forming Reinforced Concrete Products on a Long Stand. EUROPEAN MULTIDISCIPLINARY JOURNAL OF MODERN SCIENCE (EMJMS), 1. |
| 10 | Ishanovich, A. A., & Abdullaevich, K. I. (2021). Technical And Economic Comparison Of The Efficiency Of Production Of Empty Plates Of Overlapping Of Underworking Forming When Reinforced With Wire And Ropes. European Scholar Journal, 2(11), 66-69 |
| 11 | Adilkhodzhaev, A. I., Kadirov, I. A., Umarov, K. S., & Azimov, D. T. (2021, October). Features of continuous units forming of reinforced concrete products. In " ONLINECONFERENCES" PLATFORM (pp. 1-4). |
| 12 | Adilkhodzhaev, A. I., Umarov, K. S., Kadirov, I. A., & Azimov, D. T. (2021, September). Modern ResourceSaving Technologies for Production of Pre-Concrete Concrete Structures. In " ONLINE-CONFERENCES" PLATFORM (pp. 86-89) |
| 13 | Nazarova, S. B., Adilxodjaev, A. I., & Kadirov, I. A. (2021, June). LIGHTWEIGHT CONCRETES BASED ON POROUS AGGREGATES. In E-Conference Globe (pp. 134-136) |
| 14 | Adilkhodzhaev, A., Makhamataliev, I., Umarov, K., & Shaumarov, S. (2020). On the method of ensuring the quality of concrete mix and concrete on the lines of formless molding of reinforced concrete products. Solid State Technology, 63(6), 414-420 |
| 15 | Махаматалиев, И. М., Цой, В. М., & Кадыров, И. А. (2019). Современные методы исследования поровой структуры строительных материалов. Учебнометодическое пособие. Адылходжаев АИ |
| 16 | Adilkhodjayev, A. I., & Kadirov, I. A. (2018). SOME ASPECTS OF STUDYING THE STRUCTURE OF CONSTRUCTION MATERIALS BY THE METHOD OF MERCURY PUROMETRY. Journal of Tashkent Institute of Railway Engineers, 14(2), 3-7 |
| 17 | Adilxodjayev, A. I., Kadirov, I. A., & Abdullayev, U. X. ABOUT THE PROPERTIES OF A MODIFIED CEMENT BINDER BASED ON A BINARY MICROWAVE. THE SCIENTIFIC JOURNAL OF VEHICLES AND ROADS, 112 |
| 18 | KadyrovIlkhom, A., & Said, S. UmarovKadir. Some Peculiarities of the Process of Preparing the Zeolites Containing Breeds in a Ball Mill. International Journal of Recent Technology and Engineering (IJRTE). Issue-4, 7695- 7698. |
| 19 | КАДЫРОВ, И. ЦЕОЛИТСОДЕРЖАЩИЕ ПОРОДЫ УЗБЕКИСТАНА И ПЕРСПЕКТИВЫ ПРИМЕНЕНИЯ В ЦЕМЕНТНЫХ КОМПОЗИТАХ. Р е ц е н з е н т ы: генеральный директор РУП «Гомельавтодор» СН Лазбекин; д-р техн. наук, профессор АК Головнич (БелГУТ), 42 |
| 20 | Адилходжаев, А. И., Игамбердиев, Б. Г., & Сон, Д. О. (2024). К ВОПРОСУ ИСПОЛЬЗОВАНИЯ НЕКОНДИЦИОННОГО СЫРЬЯ ПРИ ПРОИЗВОДСТВЕ КЕРАМИЧЕСКИХ КИРПИЧЕЙ. Universum: технические науки, 2(7 (124)), 18-22. |
| 21 | Адилходжаев, А. И., Кадиров, И. А., Азимов, Д. Т., & Кудратов, Б. Ш. (2023). НЕКОТОРЫЕ АСПЕКТЫ ТЕХНОЛОГИИ НЕПРЕРЫВНОГО БЕЗОПАЛУБОЧНОГО ФОРМОВАНИЯ ЖЕЛЕЗОБЕТОННЫХ ИЗДЕЛИЙ. In Актуальные проблемы современной науки, техники и образования (pp. 17-17) |
| 22 | Адилходжаев, А., Шаумаров, С., & Кандахаров, С. (2022). IMPROVING THE PHYSICAL AND MECHANICAL CHARACTERISTICS OF STRUCTURAL AND HEAT-INSULATING AERATED CONCRETE. Научный журнал транспортных средств и дорог, 2(2), 131-136 |