INFLUENCE OF SOURCE TEMPERATURE ON THE COMPOSITION, MORPHOLOGY, AND ELECTRICAL CONDUCTIVITY OF SbₓSeᵧ THIN FILMS PREPARED BY VAPOR TRANSPORT DEPOSITION

1. Chen, C., Bobela, D. C., Yang, Y., Lu, S., Zeng, K., Ge, C., Yang, B., Gao, L., Zhao, Y., Beard, M. C., & Tang, J. (2017a). Characterization of basic physical properties of Sb₂Se₃ and its relevance for photovoltaics. Frontiers of Optoelectronics, 10(1), 18–30. https://doi.org/10.1007/s12200-017-0702-z 2. Chen, C., Wang, L., Gao, L., Nam, D., Li, D., Li, K., Zhao, Y., Ge, C., Cheong, H., Liu, H., Song, H., & Tang, J. (2017b). 6.5% certified efficiency Sb₂Se₃ solar cells using a PbS colloidal quantum dot film as a hole-transporting layer. ACS Energy Letters, 2(9), 2125–2132. https://doi.org/10.1021/acsenergylett.7b00648 3. Dong, J., Liu, Y., Wang, Z., & Zhang, Y. (2021). Boosting V_OC of antimony chalcogenide solar cells: A review on interfaces and defects. Nano Select, 2(10), 1818–1848. https://doi.org/10.1002/nano.202000288 4. Gharibshahian, I., Orouji, A. A., & Sharbati, S. (2020). Towards high-efficiency Cd-free Sb₂Se₃ solar cells by band-alignment optimization. Solar Energy Materials and Solar Cells, 212, 110581. https://doi.org/10.1016/j.solmat.2020.110581 5. Ghosh, S., Moreira, M. V. B., Fantini, C., & González, J. C. (2020). Growth and optical properties of nanocrystalline Sb₂Se₃ thin films for application in solar cells. Solar Energy, 211, 613–621. https://doi.org/10.1016/j.solener.2020.10.001 6. Green, M. A., Dunlop, E. D., Hohl-Ebinger, J., Yoshita, M., Kopidakis, N., & Hao, X. (2021). Solar cell efficiency tables (version 57). Progress in Photovoltaics: Research and Applications, 29(1), 3–15. https://doi.org/10.1002/pip.3371 7. Hobson, T. D. C., Phillips, L. J., Hutter, O. S., Durose, K., & Major, J. D. (2020). Defect properties of Sb₂Se₃ thin-film solar cells and bulk crystals. Applied Physics Letters, 116(26), 261101. https://doi.org/10.1063/5.0012697 8. Huang, M., Cai, Z., Wang, S., Gong, X., Wei, S., & Chen, S. (2021). More Se vacancies in Sb₂Se₃ under Se-rich conditions: An abnormal behavior induced by defect correlation in compensated compound semiconductors. Small, 17(36), 2102429. https://doi.org/10.1002/smll.202102429 9. Huang, M., Xu, P., Han, D., Tang, J., & Chen, S. (2019). Complicated and unconventional defect properties of the quasi-one-dimensional photovoltaic semiconductor Sb₂Se₃. ACS Applied Materials & Interfaces, 11(17), 15564–15572. https://doi.org/10.1021/acsami.9b01220 10. Hutter, O. S., Phillips, L. J., Durose, K., & Major, J. D. (2018). 6.6% efficient antimony selenide solar cells using grain-structure control and an organic contact layer. Solar Energy Materials and Solar Cells, 188, 177–181. https://doi.org/10.1016/j.solmat.2018.09.004 11. Keeble, D. J., Hobson, T. D. C., Wiktor, J., Berger, E., Dickmann, M., Elsharkawy, M. R. M., Egger, W., Major, J. D., & Durose, K. (2026). Detection and identification of vacancy defects in antimony selenide. Nature Communications, 17, 1413. https://doi.org/10.1038/s41467-025-68153-x 12. Kondrotas, R., Zhang, J., Wang, C., & Tang, J. (2019). Growth mechanism of Sb₂Se₃ thin films for photovoltaic application by vapor transport deposition. Solar Energy Materials and Solar Cells, 199, 16–23. https://doi.org/10.1016/j.solmat.2019.04.024 13. Lei, H., Chen, J., Tan, Z., & Fang, G. (2019). Review of recent progress in antimony chalcogenide-based solar cells: Materials and devices. Solar RRL, 3(6), 1900026. https://doi.org/10.1002/solr.201900026 14. Li, G., Li, Z., Liang, X., Guo, C., Shen, K., & Mai, Y. (2019a). Improvement in Sb₂Se₃ solar-cell efficiency through band-alignment engineering at the buffer/absorber interface. ACS Applied Materials & Interfaces, 11(1), 828–834. https://doi.org/10.1021/acsami.8b17611 15. Li, Z., Liang, X., Li, G., Liu, H., Zhang, H., Guo, J., Chen, J., Shen, K., San, X., Yu, W., Schropp, R. E. I., & Mai, Y. (2019b). 9.2%-efficient core-shell structured antimony selenide nanorod-array solar cells. Nature Communications, 10, 125. https://doi.org/10.1038/s41467-018-07903-6 16. Liang, G.-X., Luo, Y.-D., Chen, S., Tang, R., Zheng, Z.-H., Li, X.-J., Liu, X.-S., Liu, Y.-K., Li, Y.-F., Chen, X.-Y., Su, Z.-H., Zhang, X.-H., Ma, H.-L., & Fan, P. (2020). Sputtered and selenized Sb₂Se₃ thin-film solar cells with open-circuit voltage exceeding 500 mV. Nano Energy, 73, 104806. https://doi.org/10.1016/j.nanoen.2020.104806 17. Liu, X., Xiao, X., Yang, Y., Xue, D.-J., Li, D.-B., Chen, C., Lu, S., Gao, L., He, Y., Beard, M. C., Wang, G., Chen, S., & Tang, J. (2017). Enhanced Sb₂Se₃ solar-cell performance through theory-guided defect control. Progress in Photovoltaics: Research and Applications, 25(10), 861–870. https://doi.org/10.1002/pip.2900 18. Mavlonov, A., Razykov, T., Raziq, F., Gan, J., Chantana, J., Kawano, Y., Nishimura, T., Wei, H., Zakutayev, A., Minemoto, T., Zu, X., Li, S., & Qiao, L. (2020). A review of Sb₂Se₃ photovoltaic absorber materials and thin-film solar cells. Solar Energy, 201, 227–246. https://doi.org/10.1016/j.solener.2020.03.009 19. Savory, C. N., & Scanlon, D. O. (2019). The complex defect chemistry of antimony selenide. Journal of Materials Chemistry A, 7(17), 10739–10744. https://doi.org/10.1039/C9TA02022E 20. Scheer, R., & Schock, H.-W. (2011). Chalcogenide photovoltaics: Physics, technologies, and thin-film devices. Wiley-VCH. https://doi.org/10.1002/9783527633708 21. Wang, L., Li, D.-B., Li, K., Chen, C., Deng, H.-X., Gao, L., Zhao, Y., Jiang, F., Li, L., Huang, F., He, Y., Song, H., Niu, G., & Tang, J. (2017). Stable 6%-efficient Sb₂Se₃ solar cells with a ZnO buffer layer. Nature Energy, 2, 17046. https://doi.org/10.1038/nenergy.2017.46 22. Wang, X., Li, Z., Kavanagh, S. R., Ganose, A. M., & Walsh, A. (2022). Lone-pair-driven anisotropy in antimony chalcogenide semiconductors. Physical Chemistry Chemical Physics, 24(12), 7195–7202. https://doi.org/10.1039/D1CP05373F 23. Wen, X., He, Y., Chen, C., Liu, X., Wang, L., Yang, B., Leng, M., Song, H., Zeng, K., Li, D., Li, K., Gao, L., & Tang, J. (2017). Magnetron-sputtered ZnO buffer layer for Sb₂Se₃ thin-film solar cells. Solar Energy Materials and Solar Cells, 172, 74–81. https://doi.org/10.1016/j.solmat.2017.07.014 24. Wijesinghe, U., Longo, G., & Hutter, O. S. (2023). Defect engineering in antimony selenide thin-film solar cells. Energy Advances, 2(1), 12–33. https://doi.org/10.1039/D2YA00232A 25. Williams, R. E., Ramasse, Q. M., McKenna, K. P., Phillips, L. J., Yates, P. J., Hutter, O. S., Durose, K., Major, J. D., & Mendis, B. G. (2020). Evidence for self-healing benign grain boundaries and a highly defective Sb₂Se₃–CdS interfacial layer in Sb₂Se₃ thin-film photovoltaics. ACS Applied Materials & Interfaces, 12(19), 21730–21738. https://doi.org/10.1021/acsami.0c03690 26. Yang, J., Li, J., Sheng, S., Cai, Z., Li, K., Ruan, Z., Che, B., Tang, R., & Chen, T. (2026). Internal homojunction Sb₂Se₃ solar cell. Nature Photonics, 20, 644–652. https://doi.org/10.1038/s41566-026-01888-1 27. Zakutayev, A. (2017). Brief review of emerging photovoltaic absorbers. Current Opinion in Green and Sustainable Chemistry, 4, 8–15. https://doi.org/10.1016/j.cogsc.2017.01.002 28. Zhou, Y., Wang, L., Chen, S., Qin, S., Liu, X., Chen, J., Xue, D.-J., Luo, M., Cao, Y., Cheng, Y., Sargent, E. H., & Tang, J. (2015). Thin-film Sb₂Se₃ photovoltaics with oriented one-dimensional ribbons and benign grain boundaries. Nature Photonics, 9(6), 409–415. https://doi.org/10.1038/nphoton.2015.78